Check water leakage of Best Water Pressure Booster Pump
Check electrical connection
Check any abnormal sound
Check the current and voltage
Check the motor hot or cool at running condition
Suction Chamber: Check the air leakage
Pipeline: Check the water leakage
Cleaning
Overall surfaces in the panel board, MCB, MC
Outer surface of electric motor, Vessel, Pipe line
Painted the rusted surface area of Best Water Pressure Booster Pump
PURPOSE AND SCOPE of Equipment
The purpose of
this procedure is to control lifting gears, equipments to minimize such risk of
failure by the use of system of inspection and preventative maintenance. This
procedure shall apply to all heavy equipments, lifting equipment and gears in
use on the SMI project. This procedure covers types of lifting equipment, identification
of inspection status and registering of lifting gears.
DEFINITIONS
Heavy Equipment: Such as; Roller, Excavators, Bulldozers, Scrapers, Backhoes, Forklifts etc.
Lifting Equipment:Such as; Cranes, Boom trucks, Piling rigs, mobile platforms, ‘Cherry pickers’, Man lifts, Mobile Elevated Work Platforms etc.
Lifting Gear:Such as; Shackles, slings, wire ropes, chain blocks, tirfors, come-alongs, block and tackle, chains, and spreader beams, etc
Competent:Trained, experienced and able to perform the allocated task to the required standards in accordance with all applicable procedures, standards and legislation, without direct supervision.A competent person should have the maturity to seek such specialist advice and assistance as may be required to enable him to make necessary judgments and be a sound judge of the extent which he can accept the supporting options of other specialists .He must be able to certify with confidence whether the lifting equipment is free from latent defect and suitable in every way for the duty for which is required
RESPONSIBILITY
Project Manager:He is the main
responsible person in the implementation of the Equipment, Certification &
Inspection Procedure. He shall create an Equipment inspection team that will
make sure that all the provision of this procedure is followed. The Project
Manager shall make sure that this procedure is reviewed and updated timely HSE Manager:Shall keep every certificates and records regarding to the equipments about their regular inspection, insurance, driver’s license.Shall provide the names and details of training and experience of competent Lifting Supervisors.Shall ensure that lifting equipment used on site is tested regularly and is witnessed by the current color code.
Supervisor
Shall ensure that all lifting gear and lifting equipment brought to site is tested, certified and maintained in a safe condition.
Shall be responsible for the regular inspection
and maintenance of all lifting devices to ensure conformity to the requirements
of all standards and codes.
Shall coordinate with the Client regarding of
all lifting equipments.
Inspect the damage of contact point of Steam Boiler
Check the indicator lamp damage or not
Check proper functioning of all the switches
Gasket
Check the leakage
Low water cut-off
Check Low water cut-off working properly or not.
Check the float device working properly or not
Water gauge glass 1. Check the gauge glass is cracked or not
Check any leakage at the water gauge glass
Clean the glass
Burner
Check the gas pressure
Check any abnormal sound at blower motor
Check the spring condition of the damper
Check the damper working properly or not
Safety valve
Check correct functioning the safety valve
positioning the safety valve
Regulating valve
Any leakage at the valve
Is the valve operated easily
Pressure gauge
Correct Indication for steam boiler maintenance
External cleaning
Any leakage at the connecting point
Lubrication
Lubricating the moving parts
Water softener
Test the inlet , outlet water and compare
External cleaning
Feed water pump
Check water leakage
Check electrical connection
Check any abnormal sound
Check the current, voltage
Check the motor hot or cool at running condition
Replace the bearings(if damage0
Boiler Chemical
Check present stock the chemical
Cleaning
Clean the damper of inlet air
clean overall surfaces in the panel board, MCB, MC
Outer surface of electric motor
Painted the rusted surface area for steam boiler maintenance
Plant
Supervised trials were
available for the use of Emamectin Benzoate on numerous crops: citrus (oranges,
mandarins and tangelos), blackberries, raspberries, strawberries, Brassica
vegetables (broccoli, cabbage and cauliflower), legume vegetables, sweet corn,
maize, root and tuber vegetables (Japanese radish and turnips), soya beans,
sugarcane, alfalfa and mint.
Residue trial data was made
available from Brazil, Canada, member states of the European Union, Japan, The Philippines and the USA. Additionally for some crops
residue trial data reported by the 2008 JMPR from Australia,
New Zealand
and member states of the European Union were not evaluated at that time as GAP
was not available. These data are re-evaluated here where new GAP information
has become available and the data would lead to a revised maximum residue level
recommendation.
The calculator was used as
a tool in the estimation of the maximum residue level from the selected residue
data set obtained from trials conducted according to. As a first step, the
Meeting reviewed all relevant factors related to each data set in arriving at a
best estimate of the maximum residue level using expert judgement. Then, the calculator
was employed. If the statistical spreadsheet suggested a different value from
that recommended by the JMPR, a brief explanation of the deviation was
provided. Some common factors that may lead to rejection of the statistical
estimate include those situations where the number of data points is less than
15 or where there are too many values below.
Additionally the Meeting has
utilised a new tool that can provide additional useful information for
estimating maximum residue levels. The tool is based on a compilation of
residues in various crops following a single spray application where the data
were normalised to an application rate of 1 kg
ai/ha or 1 kg ai/hL (General
Consideration Item 2.8). Estimates of high residues can be made for certain
pesticides by combining the database of normalised day 0 residues with simple equations
for decline. Emamectin Benzoate is a suitable candidate for using the approach
to inform expert judgement.
Citrus fruits
Data for citrus with
corresponding GAP information were available from supervised trials conducted in
Brazil and the Republic of South Africa. In Brazil Emamectin
Benzoate is permitted to be used on citrus with a maximum of one soil application
at the equivalent of 240 g
ai/ha and two foliar sprays at a spray concentration of 3 g ai/hL and a PHI of 5 days. Residues of Emamectin
Benzoate in citrus from four trials in Brazil approximating GAP were:
0.09, 0.09, 0.13 and 0.15 mg/kg.
It is the responsibility of the Operation
Manager, Merchandise Manager, Planning Manager and UK Planning Manager to
ensure the implementation of this procedure.
PROCEDURE
First availability dates are agreed with
the manufacturing unit and detailed on the business Critical Path. From weekly production meetings / telephone
conversations it is understood whether or not these dates can be achieved. If the dates / Qty’s cannot be achieved the
Factory informed to UK planning Manager and customer is advised in advance and
a new flow is submitted.
As these qty’s detailed on the flow arrive
in to the warehouse, they are made available to the customer weekly. (Where
sizes are out of buying ratio factory will chase for the balance.)
Using the position to flow document stock
levels is monitored and where potential issues arise the customer is inform by UK
head office.
Fortnightly the customer may send through a backlog sheet showing their version of the contract position and where discrepancies exist between both documents, the customer is advise. This continues through the life of the style until all customer stock is sold.
Ratio control sheets are raised by the team and monitored weekly to make sure the stock is being produced to agreed ratios. Smoke Tube Boiler
