Paper Roll to Sheet Cutting Machine . Quality control system
Paper roll to sheet cutting machine
P.I.V Gear box
Variable Speed Control 2 H.P Motor
Electric Control Panel
Hard Knife
V-Belt fanner make
Delivery section
Buyer will not accept any short shipment .We have to send the daily report which will show the delivery quantity to order quantity. They will also collect carton receipt report from their makers. In case we short deliver like we do they will apply discount. It is very similar to Sheet Pasting Machine
Therefore it is very important issue that delivery section add a supervisor for Buyer to receiver produced goods in full quality from production department and ensure the carton’s are piled up in
assigned area.
Customer care will hand over the store list of Factories.
Buyer works with 123 factories in Dhaka and Chittagong. We will have to distribute goods without delay. Deliver department must not handle and delay in arranging trucks/transportation as they do with current orders.
If extra transport support required multiple transports company can be selected and agreement can be done for transport availability.
No short shipment allowed.
Buyer will evaluate our delivery service and if any trouble and pain is given to their factories, factory will receive penalty point of discount.
Quality control system
Quality is one of the major part of buyer order execution. Each complains will put ATl to red rated factory in buyer records and will be terminated from nomination after certain quality control complains.
A AQL of 2.5 to be applied.
Quality to be controlled from board making to finishing.
A separate quality team to be formed for quality control of orders who will be educated with buyer QA standard.
Each lot to be inspected and record to be kept for buyer audit.
Final Inspection to be conducted and for singed copy of report by Ismail/Rubel to QA manager to be sent to office.
In case any quality problem takes place at customer’s ware house, first carton investigated. This strict instruction. As they will not allow any disruption of supply chain.
Paper Roll to Sheet Cutting Machine -The replacement failed and goodswill cancel nomination with imposition of penalty of full cost of airing. Productions
to QA department are strictly instructed to replace carton’s instantly in case
of quality problem and then investigate.
Heavy Duty Washing Machine – One of the most important options to reduce the environmental impact of industrial processes is to minimize the number of required process steps necessary to produce the desired quality of products. As an example, instead of traditional pre-treatment of textiles, the minimum required treatment processes can be applied. The pre-treatment of the fabrics depends on the desired colour depth and other characteristics of the finished product. For example, fabrics that will be dyed in dark colours should not be strongly bleached.
Oftentimes, reducing the number of
process steps is possible through treating the fabrics in wet conditions,
without the need to dry them first. This allows certain process steps to be
combined which normally are carried out separately. Examples that have been
implemented include:
Improvement of the feel of yarn
directly after painting without drying the material first;
Making wool moth repellent during
dyeing;
Development of a single step
pre-treatment of the fabric that combines washing, scouring and bleaching in
such a way that one washing / drying stage can be omitted. Depending on the
type of textiles treated, one step pre-treatment can yield substantial energy
and water savings because two or even three of the wide washing steps can be
reduced to one. One-step pre treatment is especially feasible for textiles that
are relatively light weight;
Wet-in-wet impregnation of
treatment chemicals, in order to skip a drying stage. Many treatments of
fabrics can be applied directly on the wet cloth after the wide washing
process. In that case, the cloth is impregnated “wet-in-wet”,
followed usually by a reaction step in order to let the chemicals work on the
fabric. Afterwards, the cloth is rinsed on a wide washing machine. Examples of
this process include: (1) The wet-in-wet pre-treatment on a continuous
pre-treatment line; and (2) the wet-in-wet application of a cationic treatment
chemical after rinsing out unabsorbed reactive pigments;
Combined dyeing and application of crease repair agents (synthetic resins) so the material only has to be dried once.
MACHINE DESCRIPTION
BRAND
ORIGIN
CAPACITY
Washing Machine
Sut
& Lic
Singapore
250
KG EACH
Asian
Star
China
250
KG EACH
Panyu
Xin Xin
China
250
KG EACH
Local
Machine
Bangladesh
250
KG EACH
Sample
Washing Machine
Asahi
Laundry Washer
Japan
30
KG
Asahi
Laundry Washer
China
200
KG
Local
Machine
Bangladesh
150
KG
Local
Machine
Bangladesh
20
KG
Hydro-extractor
Sut
& Lic
Singapore
250
KG
Asian
Star
China
250
KG
Steam
Dryer
Sut
& Lic
Singapore
200
KG
Asian
Star
China
200
KG
Local
Machine
Bangladesh
160
KG
Gas
Dryer
Sut
& Lic
Singapore
250
KG EACH
Steam
Boiler 40% use in washing
Cochran
Scotland
5
Ton
For Denim-
Yellowish marks come from chemicals & from back staining.
Indigo dyes have big molecule structure, so after washes it’s come back to the garments again. Sun lights affect those molecules & make the garments yellow. So we have to wash it clearly and use the anti ozone (O3) softener.
To prevent crease marks reduce RPM & temperature at desizing stage.
To avoid uneven increase pH. At lower pH bleach work quickly & makes uneven.
Use buffer solution to stable pH. For pH changing shades will change also.
Hypo must be clear to prevent Yellowish effect
For Dyeing-
Important parameters for dyeing-
Hydrophilic
Base color (bleach slowly for even dyeing)
pH
Circulation
Temperature
Anti Ozone softener improves the fastness of Sulpher dyeing. Don’t use any non-ionic softener.
To improve the light fastness, protect the surface.
Others-
To make garments soft, use good desizing agent. Then use micro & macro emulsion together. Dry in the steam dryer.
Improve tearing strength by using polyurethane
NaHCo3- pH doesn’t change with temperature
Na2CO3- pH change with temperature
Polyethylene (LEPN) used for color fastness. It makes the fabrics slippery & hence improve the color fastness (Only rubbing)
Densoft Ultra for Sulpher dyes.
Densit-AT- acid buffer to stable pH.
New Developments-
Crinkle Effect on denim garments-
Tie the garments inside of a net
Wash at 80’C for 10 mints.
Open the net.
Enzyme (Neutral) with anti-back staining agent for 30min at 30’C.
Rinse 2times.
Bleach with KCI (10g/l) at 50’C for 10-12min
Neutralize with Hypo
PP
Neutral with meta
10% solun of cationic softener+ Polyurethane (250g/l) & brush by hand.
Dry with iron & then curing
For fluorescent dyeing-
Heavy Duty Washing Machine List – Deraw-FX 2gm/l——at 60’C for 30min, pH-9———-rinse——dyeing—fixing
Frequency Inverters – Power deficit: Latest statistics reveal that Bangladesh faces a power deficit of up to 2000 MW against a demand of 5000 MW daily. It may be noted that for proper ICT development an uninterrupted power supply is a must.
Sl.
Description of
items
Qnty
Unit Price
Amount/Tk.
01.
HITACHI FREQUENCY INVERTERS,
MODEL: SJ300-150HFE,
CAPACITY: 15 KW, 400V AC, 3
PHASE, 50 HZ,
MADE IN JAPAN.
4 Nos.
112,000.00
448,000.00
02.
HITACHI FREQUENCY INVERTERS,
MODEL: SJ300-300HFE,
CAPACITY: 30 KW, 400V AC, 3
PHASE, 50 HZ,
MADE IN JAPAN.
1 No.
195,000.00
195,000.00
03.
HITACHI FREQUENCY INVERTERS,
MODEL: SJ300-450HFE,
CAPACITY: 45 KW, 400V AC, 3
PHASE, 50 HZ,
MADE IN JAPAN.
1 No.
267,500.00
267,500.00
Note: The above prices are included all costs for upto delivery at your factory.
SALES TERM & CONDITION :-
Validity of offer: 30 days from the date of offer.
Payment: 50% amount in advance on order confirmation and balance 50% before delivery at your factory.
Delivery: 21 days (to checked during order confirmation).
Network infrastructure: Outside Dhaka, at present a few computer network infrastructures have been developed so far. Apart from some educational institutes outside Dhaka, observation finds that most of the LAN setups are Dhaka centric. This observation reveals the reality of the digital gap even within the country. Frequency Inverter Price List. Network iIfrastructure
Use of Internet: For the ICT development Internet users of the country must be increased. In this case our position is the worst one among the South Asian countries. The latest statistics (ITU, 2007) revealed that Internet penetration in our country is only 0.3%. Whereas, in Pakistan and India, it is 7.3% and 5.3% respectively.
Under sea submarine cable: Since 2006, Bangladesh has been connected to worldwide Internet Super High Way through an under sea submarine cable. But this single submarine cable frequently faces disruption resulting in slow bandwidth. End of Frequency Inverter Price List. Network iIfrastructure
Pe Film Blown Line Production : HDPE/LDPE/LLDPE tubular film Thickness : 0.01-0.2mm for LDPE, 0.01 – 0.06mm for HDPE Film width : 32” – 47” Extrusion output: Max. 80 – 100kgs/hr for LDPE, 60 – 80kgs for HDPE Screw dia : 55mm L/D : 28/1 with grooved barrel Material of screw & barrel : SACM645 high carbon content alloy tool steel, honed polished, and chromed, nitride hardened, with water cooling device on feed hopper Barrel cooling : 1/4HP x 2 sets Main motor : 40HP AC motor + inverter control Gear box : FC25, one stage speed variation with lubrication system, with coolor Gear material : SCM21 carbon treat & gear face ground No die ( from Marigold 100 + 150mm HDPE die to be used on this machine ) Cooling blower : 5HP with dome type air distributor, flexible hoses, with inverter control Take up unit : Adjustable type, with pneumatic nip roller, with lower working platform With wooden collapsing frame & gusseting board and bubble stabilizer Take up roller : 160mm dia. X 1300mm (L) Take up motor : 1HP AC + inverter control + reducer with coupling Second take up roller : driven by 0.2kg/M torque motor + reducer with coupling Winder unit : Single surface contact manual type Winding roller : 250mm dia. X 1300mm (L) Winding motor : 0.3kg/M torque motor + reducer with coupling With banana roller x 1, with winding reel x 2pcs Control Panel : 1 set, With digital displaying temperature controller, A-meter, push button, Magnetic contactor, Spring type T/C wire for temperature sensing Socket type heaters on die & adaptor
Options: Rotary die device 1 set USD5,000.-
6% for bank interest of 365 days usance L/C for total amount: to be additional Others 1. 2KW 1500mm Encore brand corona treater (U.S.A)
1 set USD5,193.- 3KW 1500mm Taiwanese made corona treater
1 set USD3,960.- 2. 1500mm economic back to back winder
1 set USD7,560.- Deluxe type winder with middle film slitting stand 1 set USD11,520.-
