Bursting Strength Tester works for Compression Test :
Bursting strength is the distending force and compression test which is applied at right angles to the plane of the fabric, under specified conditions, which will result in the rupture of a textile. Compression test are generally used compression test for fabrics where there are definite warp and weft directions in which the strength can be measured. There are also fabrics for impact test and tensile testing which are simultaneously stressed in all directions during service, such as parachute fabrics, filters, sacks, nets, and present at the elbows and knees of clothing, where it may be important to stress them in a realistic manner.
Specifications of Bursting Strength Tester :
[label type=”label” title=” Specifications Name“]
[label type=”label” title=”Specifications Value“]
Product Category
LAB
Machine Category
Bursting Impact Test
Product Name
Auto Bursting Strength Tester for burst test
Product Model
According to Manufacturer of burst test
Product Class
New
Origin
China/India/Others
Brand/Manufacturer
Name of Manufacturer
Agent in Bangladesh
No/Yes
Power
1 , AC220± 10%, 50 Hz, 120W
Temperature
(20±10) °C
Certification
SGS/Others
Production Capacity
High Pressure 2.5~100 Kg/ cm^2 (0.1kg/cm^2)
Unit (sitchable)
Kpa, psi, kg/cm^2
Accuracy
± 0.5%
Pressure Range
250~5600kpa
Speed of Compression
High Pressure 170± 10ml/min
Specimen Clamping Force
>690kpa
Oil
85% Glycerin; 15% Distilled Water
Sensing method
Pressure Transmitter
Indicating Method
Digital
Display
LCD
Material of the Ring
Stainless Steel
Opening in Upper Clamp
31.5 ± 0.05 mm Diameter
Opening in Lower Clamp
31.5 ± 0.05 mm Diameter
Motor
Anti-vibration Motor 1/4 HP
Operation Method
Semi-automatic
Resolution
1 kPa
Dimention
445×425×525mm
Weight
Approx. 64 kg
Description
Impact testing are engineering instruments for tensile testing a widely used measure of resistance to rapture in fabric. impact test equipment
Tensile Test:
Machine used :Alphatens tensile tester & Titan universal strength tester.
Machine manufactured by :James . H . Heals and company, England.
Person responsible for tensile test: QA lab assistant
Frequency:Every order
Procedure of tensile test:According to customer’s requirement and / or as specified in the ATL quality stander specification.
Performance standard:According to ATL quality stander specification
In case of non conformity :To increase tensile strength re-mercerized (increase of 5 %to 10%) and re finish.
Feature of Bursting Strength Tester for Tensile Testing:
Feature of bursting strength tester for tensile testing is given here-
Parts of Bursting Strength Tester
User friendly menu interface for bursting tester of impact testing for tension test
Burst test has data processing function of flexural strength for tension test
It is applicable to tension test bursting strength for fabric
Used for testing the burst test and degree of fabrics, non-woven fabrics
Fabric inspection machine in fabric mill, apparel industry and textile industry is the main element of making a garment is fabric. It use for fabric design of nylon fabric, tulle fabric, polyester fabric and apparel fabric in fabric mill. So, it must be checked the quality of a apparel fabric before making garments. This is done by a special machine is called fabric or cloth inspecting machine. Attachment for pulling the fabric through the inspection area on machine is equipped with a rubberized pull roll, so that the device is precise by a sleeplessly adjustable motor.
Spreading for Fabric Design :
Spreading and opening device with a counter wise driven scroll roll, made of stainless steel in front of inspection illuminated wide screen, which make the fabric efficiently visible on screen.
Controlling of Apparel Fabric:
Inverter controlled motor for smooth operation which have variable resistance for controlling main motor speed. Three separate flicker switch used for controlling illumination for checking apparel fabric.
Input and Output for Fabric Mill:
Roll to roll
Roll to plaited or folding
Set up with 6 PCs bearing loaded stainless steel roll in the bottom side of the machine to move the fabric roll. A bearing loaded moving plait is installed for easy loading of plaited fabric for fabric mill.
Specifications of Fabric Inspection Machine:
Specification of the equipment inspection is given below-
[label type=”label” title=”Specifications Name”]
[label type=”label” title=”Specifications Value”]
Product Category
Qc/Inspection
Machine Category
Inspection Machine
Product Name
Equipment Inspection Machine
Product Model
According to Manufacturer
Product Class
New
Origin
China/India/Others
Brand/Manufacturer
Name of Manufacturer
Agent in Bangladesh
No/Yes
Power
380v, 1.1KW
Temperature
Normal
Certification
SGS/Others
Production Capacity
200 Set/Sets per Month
Detection width
2400mm
Maximum roll diameter
580mm
Speed
≤50m/min
Error
≤±3mm
Fabric length calculation
≤0.3%
Diameter
2300*1000*1780mm
Motor power
2.2kw
Weight
1000KG
Description
Applied to fabric design of nylon fabric, tulle fabric, apparel fabric etc
Details in Inspection machine
Machine Name : Fabric Inspection Machine.
Country origin : Locally made
Model No. : Serial No. 295
No. of machine : 02
Speed of the machine : 13 meters / minute (Depends upon the quality) premium.
h) Fabric waste : 0.7%-1.0% due to swatch cutting from each roll.
Production capacity per day : 2X(13X1420X.55) =20163 mts
Some Fabric Inspection Findings by Buyer:
Fabric Inspection Report.
Need to identify Rejected Fabric Area Providing Information.
Fabric must be put on with Stand by color and buyer wise.
Stock fabric must be put in separately and identify the buyer with bin card.
Cutting Section needs to setup reject fabric/cut panel area with code number.
Need to provide log sheet about sharp tools like, scissor, cutter, poker, stapler, pattern, knife etc.
House keeping system must be improved in everywhere.
Provide all the quality reports whenever buyer demands it.
Providing machine maintain log timely
Remove the needle from the idle machine.
Missing tube light in many places. Specifically, in the packing area.
Fabric Inspection Report
The supplier does 100 % fabric inspection. Factory is doing 10% inspection on received qty by American 4 point system. The given points will be on following defects basis…
0-3 inch (1point)
(2point)
(3point)
Above 9” (4point)
After allocating the points on any roll / lot, with the help of following formula we find the POINTS PER 100 SQUARE YARDS
TOTAL POINTS X 3600
Actual Point
POINTS / 100 SQ.YD. = ———————————————— x 100
ACTUAL LENGTH X CUTABLE WIDTH
According to the American standards of evaluation, a lot is accepted if it has 40 or less than 40 points/100 Sq.yard. In Lenny, in order to have the best quality output, the points is reduced to 20.(i.e.) if a roll has more than 20 points/100Sq.yard, then that roll is termed as rejected and Technical manager or Merchandising manager will take final decision on that particular roll. The inspection format called RANDOM INSPECTION REPORT FOR FABRICS. This format reflects the full fabric defects; about widths (which play a vital role in cutting,) roll length, etc…
It’s duly signed by fabric inspector and submits the report to quality section. One copy also goes to technical manager, CEO and ACEO.
Shade Segregation Report
After off-loading the fabrics, one swatch has to be cut from each roll, then mention the yardage and roll no on it. From all these swatches we form a blanket and if it is wash program then send for washing. Washing will be done as per approved standard for that Po # with respective color. This wash blanket will be approved by merchandising dep., technical manager and in case of any discrepancy then it will rewash. Approved blanket will cut into swatches and with the visual effect of each swatch, we assigned them one family. There can be different color family in one color. Color family is always finalized by merchandising manger and technical head. This approval recorded into one report which reveals full information about each color family like roll no. Yardage, no of color family etc… With this report, fabric store will issue the bulk fabric to cutting dep. Fabric store will not issue second color family even a single roll is pending from first one. So one time one color family only then next one.
Shrinkage Segregation Report
In case of wash garments, shrinkage plays a vital role. There will be different pattern for diff shrinkage. As per color family, we also assign shrinkage family to each color. Shrinkage will be done for vertical and horizontal respectively.
We assign the shrinkage family in four groups.
GROUP TYPE %
A VERTICAL 1 – 3%
B VERTICAL 3.5 – 6.5%
C HORIZONTAL 1 – 4.5%
D HORIZONTAL 5 – 9%
So we make a report for each group and forward it to store so that it can issue fabric accordingly.
Down Time :
Change to batcher time 5 minutes (Length of batcher 3500 yards)
Gap between roll completion and new roll starting time 3 minutes. Avg. roll length is 125 yards.
Fault detection time 25 sec per events and 10 to 15 events per 120 yds
Process:
Operator sets the batcher and feeds the fabric by the guide roller. The fabric goes through a special table where there is arrangement for light to defect faults in the fabric
Faults point system
Faults length
Points to be assigned
3 inch or less
1
Over 3 inch but less 6 inch
2
Over 6 inch but less 9 inch
3
Over 9 inch
4
Total Faults Points System
Actual Point
Points/100 sq. meter = —————————————- X 100
Actual length x Fabric with
Different type of Fault:
Miss warp
Double warp
Miss pick
Double pick
gote
Hole
Dyeing fault
Temple Mark
Slub
etc
Operation staff for weaving section:
Executive
Jr. Executive
Supervisor
Operator
Asst. Operator
Helper
Feature of Fabric Inspection Machine:
This features of the machine for apparel fabric is given below –
Fabric Inspection Machine Parts
The operation box is freely easy and comfortable operation for fabric design
Capable for multi-group light rollers with a djustable lifting to regulate speed of each motor group respectively for a tensionless feeding and rolling for fabric design
Capable for photoelectric device for automatic edge-alignment of apparel fabric and nylon fabric
Length counter meter and mendable electronic length counting meter
Prepared with bright light pipe devices, the degree of brightness can be accustomed.
Equipment inspection with the cloth relaxing system, it can inspect as well as relax the cloth at the same time.
The speed of rolling can be set according to user requirements
Some types of size and models are providing to be chosen and fit for different thickness of tulle fabric.
It is customized wide ferrous detect machines in fabric mill
Quilting embroidery machine is sewing for embroidery patterns, quilting embroidery designs , embroidery boutique on garments, beeding set and other textile. Quilting embroidery machine can embroider while quilting, even change one from the other casually according to the pattern. Quilting embroidery stitches is a new generation in embroidery stitches software for applique designs & quilting Field. Quilting embroidery stitches is widely used in making amazing designs of family textile e.g. crazy quilt stitches , bedclothes and sofa padding for cute embroider . Embroidery patterns of quilting embroidery stitches are different form other embroidery boutique.
Types of Machine for Quilting Embroidery Designs :
There are two types of machine is used for quilting embroidery designs-
Single needle row quilting embroidery machine
Double needle row quilting embroidery machine
Function of Quilting Embroidery Machine:
Quilting with embroidery machine is used for make sewing and embroidery on the continuous fabric rolls of quilting embroidery patterns
Making cute embroidery and embroidery stiches are done by this machine.
Quilting Embroidery Machine can make amazing design
Quilting with embroidery machine can make applique designs
Quilting Embroidery Machine can make cute embroidery
Quilting with embroidery machine also make embroidery on beddings, bedspread, and cushion which treat as amazing designs as well as applique designs
Quilting with embroidery machine is widely used in textile and garment industry to amazing designs
Quilting with embroidery machine adopt unique pneumatic air cylinder for making cute embroider to move the frame.
Specifications of Quilting Embroidery Machine for Amazing Designs:
[label type=”label” title=”Specifications Name”]
[label type=”label” title=”Specifications Value”]
Product Category
Embroidery
Machine Category
Embroidery Machines
Product Name
Quilting Embroidery Machine
Product Model
According to Manufacturer
Product Class
New
Origin
China/India/Others
Brand/Manufacturer
Name of Manufacturer
Agent in Bangladesh
No/Yes
Power
380V/50HZ, /220V/60HZ, 5kw
Temperature
Normal
Certification
SGS/Others
Production Capacity
58 Sets Per Month
Head Number
33/35
Rotary hook
Big rotary hook
Rotary hook speed
1000rpm
Computer
Touch screen
Needle Number
2/3/9
Needle space
50.8
Embroidery Area
360*510mm
Speed
1000RPM
Quilting Width
3.3m
Quilting thickness
20-600g
Dimensions
5300× 1100× 1950mm
Power consumption
4.5KW
Motor
Servo Motor
Stitch Length
Binary 0.15-12.7mm
Memory capacity
1000000 stitches
Maximum embroidery speed
750 RPM
Display
LCD
Port
USB
Weight
3000kg
Description
This compact single head embroidery machine is suitable for doing all kinds of flat / cap
Advantages of Quilting Embroidery Machine for Embroidery Boutique:
Advantages of quilting embroidery machine for embroidery boutique is given below-
Quilting Embroidery Stitches
It makes amazing designs and stitches
It makes crazy quilt stitches
Machine generated crazy quilt stitches is better than hand quilting stitches
It makes very small design within 1-2 inches looks like cute embroidery patterns
Double row needles can work and combine the embroidery stitches together,
Making this type of embroidery patterns save working time
Embroidery patterns and embroidery boutique improves productivity.
Embroidery boutique enhance its looking.
Cute embroidery patterns drawing by this type of machine
For making embroidery patterns by machine take less time than manual time
Making embroidery patterns by machine increase its quality
Embroidery Backing:
Embroidery or appliqués may have harsh back due to gathered ends that may scratch the newborn/infants skin. To avoid this it is a requirement that embroideries/appliqués should have a fused backing that is applied under appropriate conditions.
Type of Fusing
It is suggested that a lightweight knitted interfacing is used. Examples include PD9333 & PD 9233-09 (Freudenberg).
Please note that low formaldehyde interfacing developed specifically for newborn and infants should be used for these products
Method of Application
Continuous Fusing Press capable of temperature, time and pressure adjustment.
Interlining and base fabric to be cut in the same direction warp and weft
Compatibility of the fusing applied to the base fabric is to be tested prior to bulk production.
Conditions
Interfacings to be applied under optimal conditions to achieve maximum adherence. The following is recommended for 100% cotton base fabric.
TEMP: 130 Deg Celsius
TIME: 12 Seconds
PRESSURE: 3 Kg/cm2
FUSE – LINE TEMPERATURE: 127Deg Celsius
NOTE: The above conditions may vary with the differences in the fibre content of the base fabrics used. The Temperature, time and pressure settings will need to be adjusted accordingly.
Bond Strength
Testing is required to confirm the optimal applied pressure and temperature and the period of time required for their applications to achieve maximum adherence of interfacing.
The fusing should be evenly adhered across the entire piece of fusing, with contact across the base fabric at all points including the centre and edges.
After cooling – 25N Before Wash – 21N After Wash (3 washes- to care instruction)
Testing Method
Supplier to undertake wash testing as indicated by care instructions for each type of base fabric to ensure that desired result is required and that the test replicates intended customer usage.
Dimensional change of fused fabrics is to be tested after three wash /dry cycles according to the care instruction. Standard to be not greater than +/ – 1.5% warp & weft.
Suppliers are to keep testing records for review during quality audits.
Wash test samples must also be available for observation.
Final Inspection Method
The fusing should move with the expected performance of the base fabric it is applied to.
The physical inspection method should simulate as close as possible customer usage. The fused fabric is to be held between both hands and extended warp and weft by gentle pulling between both hands, keeping your arms at your side.
This pulling motion is to be performed twice on the weft and twice on the warp of the base fabric.
The fused base fabric is to be stretched as far as it reasonably can be with the stretch of the fabric, without applying excessive force.
During this motion it is critical to observe that the fusing does not lift at the edges and that it is securely adhered across the entire piece of fusing. It is critical to ensure all areas of the fusing are in contact with the base fabric. This includes any area in the centre of the fusing which is covering the bulkier areas of the embroidery.
Quilting with Embroidery Machine for Sale:
I am Nancy from China, our factory specialize in quilting machine more than 20 years, and exported to South-east Asia and Middle East and Europe and Australia and Africa and North and South America. Glad to learn you’re on the market of this machine. Multi Needle Quilting Machine is our main machine, competitive price and good quality are our advantage. I attached introduction and picture, please check.
If you have interest, don’t hesitate to contact me. For more machine, please visit our website in my signature.
Cap Embroidery Machine is used for embroidery patterns, applique designs, advanced embroidery . Embroider may be a complicated proposition designs because of the curved feature of hats along with the seams which are thicker than the usual so to do this job by a machine is called cap embroidery machine which is used for cute embroidery designs. The front with the cap needs several forces since it’s thicker than just that for easy fabric.The main advantages of cap is cylinder automatic embroider by machine.
Function of Cheap Caps Machine for Cute Embroidery Designs:
Multi heads and multi needles, can embroider some chain stitch flat designs at the same cheap caps designs
Thread breakage head position when the thread break during embroider of cheap caps
Attachment the sequin device, the simple towel device, the Cording device, the Boring device and the auto Lubrication device
barudan machine control embroider automatically
Cheap caps machine can change color automatically for cute embroidery designs
Cheap caps machine have cap frame
Cheap caps machine can embroider in the different GSM and make advanced embroidery
Cheap caps machine has collection of design called embroidery library
Embroidery library reach with embroidery patterns
Embroidery patterns made by this machine for cute embroidery
Specifications of Embroidery Cap Printing Machine :
[label type=”label” title=” Specifications Name”]
[label type=”label” title=”Specifications Value”]
Product Category
Embroidery
Machine Category
Cap Embroidery Machine
Product Name
Embroidery cap printing machine
Product Model
Captain cap
Product Class
New
Origin
China/India/Others
Brand/Manufacturer
Name of Manufacturer
Agent In Bangladesh
No/Yes
Power
3 phase 380V / Single phase 220V 50-60Hz, Consume 2.5kVA
Temperature
Normal
Certification
SGS/Others
Production Capacity
30 Set/Sets per Month
Sequin Speed
600-700 rpm
Computer
Touch screen
Head
8/16/32
Head distance
250mm
Needle Number
3/6/9/12
Embroidery Area
400*800
Speed
850 rpm
Motor
Servo motor
Power consumption
0.8kw/1.0kw/1.5kw
Dimensions
80*80*80cm
Stitch Length
0.1-12.7mm
Memory Capacity
2, 000, 000 stitches
Display
LCD
Port
USB
Weight
1860mm
Description
It can make designs on T-shirts, sweaters/sweatshirs with cap frame
Feature of Cap Embroidery Machine for Advanced Embroidery:
Feature of cap embroidery machine for advanced embroidery is given here-
Cap with embroidery
Suitable for flat bed embroidery as well as cap embroidery machine
270° Wide cap frame unit
USB port option for transferring embroidery patterns
Change auto color of embroidery patterns
Automatic thread trimmer of cap frame machine
Pre Sew design trace capable of embroidery patterns
Thread break detection facility of cap frame machine
Auto Start and Stop option of cap frame machine
Emergency Stop option of cheap caps machine
Digital control panel of cheap caps machine
Frames included of cheap caps machine
Hoops Included
Sewing basics for cap embroidery machine
Policy on blades and other sharp instruments
Blades, knives, scissors and other tools for cutting can cause complaints and are a serious safety risk. It is essential that garments manufacturer correctly manage their use to reduce the risk of them ending up in customers’ garments or accessories. Garments manufacturer should have a Sharp Tool Policy in writing that is well communicated to garments manufacturer workers and staff and that somebody has been assigned responsibility to.There are several ways of doing this:
Ensure that all raw material suppliers have adopted the same policy and that raw materials are free from unwanted and potentially dangerous extraneous metal objects.
Supplies entering the factory premises should not be fastened with metal pins, staples or clips.
Neither operatives nor supervisors should have access to pins, staples or clips.
Any industrial needles, domestic needles or pins used in areas such as design, packing etc. must not be allowed near the production area.
Any sharp instrument used during production should be numbered and recorded at a central point. Those items should then be held securely until they are issued to workers each day by a responsible person.
Garments manufacturer should secure these instruments to workstations to prevent them getting lost. They must not be detached at any time unless they need changing or are being signed back in.
Whichever method garments manufacturer use, garments manufacturer must apply the following controls.
At the end of each shift, tools used for cutting must be signed back in (or inspected if secured to workstations) and checked for signs of damage. Any missing parts of blades must be accounted for.
Knives used should have a fixed blade. Garments manufacturer must not use blades that can be snapped off when worn down.
New blades should only be issued when old ones are returned.
No other uncontrolled tools are allowed in the factory.
A responsible person must carry out random checks to make sure these guidelines are followed. The results of these checks, including details of any action that needs to be taken, should be recorded and available for inspection.
If any blade or sharp instrument becomes lost, all stock produced since the last inspection must be quarantined immediately. Garments manufacturer must then take all necessary steps to make sure the missing item is recovered and the stock is free from any safety risk.
Detecting broken sewing needles
Embroidery manufacturer must have a formal needle replacement policy and system in garments manufacturer factory (see David Howard manual for guideline). Buyer expect garments manufacturer to take all possible precautions to make sure that no full or broken needles remain in the garments, as this would be unacceptable.
Garments manufacturer needle replacement policy must be written down and kept up to date, ready for inspection if necessary.
Garments manufacturer must keep a record sheet (e.g. daily, weekly). Each time a needle breaks, garments manufacturer must attach the needle pieces to the report with clear sticky tape and fill in each section of the report. The record sheet must be available for us or our representatives to inspect at any time. Garments manufacturer must keep filled-in record sheets for at least 6 years.
The appointed person must hold all replacement needles for the factory in a secure location and must make sure that no extra needles are kept at machines. No other metal instruments (such as pins, staples, or clips that may get lost) must be allowed in the production areas.
Operatives must immediately tell the supervisor when a needle is broken. The supervisor will then be responsible for making sure that all necessary steps are taken to prevent contamination. Replacement needles must only be issued by the appointed person on a one new needle for one complete old needle basis. It is unacceptable for extra needles to be kept by the operatives.
Mechanics must be fully aware of the needle replacement policy and should ensure that no spare needles are left in the sewing room or on idle machines.
When a needle breaks, if all the pieces are not found quickly, the contaminated garment plus those in the surrounding area must be moved to a clear area for a more thorough search.
Searches for broken needles should be supervised by first line managers. A metal detector can be used at this stage to help find the pieces of broken needles.
If garments manufacturer cannot find all the pieces of a needle, garments manufacturer must destroy the relevant garment and any that have been close by.
Tagging gun needles & hand sewing needles must also be included in this policy.
If all or part of a needle is found, we class this as a critical fault and we will have to reject the order or goods may be recalled from our customers’ stores.
Sequin embroidery machine embroider on garments and this machine is made by multi head and multi needle, that can embroider several free embroidery design at the same time it can realize the function of auto trimmer. The feature of sequin machine is automatic control of embroidery, no need hand embroidery, make the embroidery robotization. This sequin embroidery can change color according the embroidery design when in embroider. Some machine may assembly double sequin in first needle or last needle, the movement of sequin machine can be driven by motor or valve. This sequin machine support sequins embroidery stitch with all kinds of lockstitch and chain stitch. Sequin Embroidery Machine makes secrets of free embroidery designs that gives us beautiful embroidery.
Function of Sequin Embroidery Machine which Embroider on Garments:
Thread breakage head position when the thread break during embroider,
Sequin machine can repair embroider and make embroidery stitch,
Attaching the sequin device it can mbroider sequin design and combine flat embroider at a time,
Making beautiful free embroidery designs by embroidery digitizing process,
Sequin embroidery designs free download is better than hand embroidery,
Attaching the simple towel it can embroider on towel design and combine flat embroider at a time,
Attaching the Cording it can embroider the cording design and combine flat embroider at a time,
Attaching the Boring device it can embroider the boring designs also,
It looks like hand embroidery,
Some machine provide free embroidery designs,
Embroidery designs free download is possible by USB port
Free embroidery designs is not better always.
Specifications of Sequin Embroidery Machine:
[label type=”label” title=”Specifications Name”]
[label type=”label” title=”Specifications Value”]
Product Category
Embroidery
Machine Category
Embroidery Machines
Product Name
Sequin Embroidery Machine
Product Model
According to Manufacturer
Product Class
New
Origin
China/India/Others
Brand/Manufacturer
Name of Manufacturer
Agent In Bangladesh
No/Yes
Power
3 phase 380V / Single phase 220V 50-60Hz, Consume 2.5kVA
Temperature
Normal
Certification
SGS/Others
Production Capacity
30 Set/Sets per Month
Sequin Speed
600-700 rpm
Flat Machine Speed
700-850 rpm
Computer
Touch screen
Head
32
Head distance
250mm
Needle Number
3/6/9/12
Embroidery Area
400*800
High Speed
1200SPM
Motor
Servo motor
Power consumption
0.8kw/1.0kw/1.5kw
Dimensions
80*80*80cm
Rail
Linear rail
Stitch Length
0.1-12.7mm
Memory Capacity
2, 000, 000 stitches
Embroidery Speed
750 RPM
Display
LCD
Port
USB
Weight
1860mm
Description
This machine can make embroider in T-shirt, clothes, and all other garment.
Embroidery Digitizing Requirements Of Sequin:
Must be suitable for the material/ product/ treatment
Embroidery Digitizing Requirements must Must follow artwork
Must be securely attached so that it does not fall of the product
Must be correctly positioned, according to instructions when attached by hand, be secured with a knot every 2.5 cm/ inch
Must have no sharp edges withstand the product’s wear and wash
Embroidery Digitizing Requirements must be stitched with poly/ poly core spun yarn or poly/ cotton core spun yarn
Sequin Embroidery for Children Wear:
Sequin embroidery must be checked for sharp edges and sharp points.
Sequin embroidery must never break or disassemble. Styles with sequins need to be wash tested 5 times to ensure that all sequins are intact, and not sharp after wash.
Where hand stitched, the stitching should be locked off after every 10th stitch.
Monofilament is allowed to be used for attaching sequins as long as the maximum length of monofilament thread that can form a loop or string with free end, is maximum 1 cm for sizes up to and including size 98, and maximum 7,5 cm long for sizes above 98.
When using all over sequin fabric, make sure there are no cut sequins at the seams. For inside seam allowance – use binding to cover sequin edges.
Additional requirements for size 44 up to and including size 98
Sequins can be a choking risk. Due to their small size they cannot be tested for 90/70N pull force.
Sequins are only allowed if:
Sequins are machine stitched in at least three points per sequin.
Sequins are covered by small-holed mesh and
Risk assessment is done for every style to ensure the safety of the sequins. When stretching the fabric, the thread should not break and cause loose sequin embroidery.
Spindle sequin embroidery print is not OK as the decoration can easily come off. Foil print or glitter print could be an option.
Feature of Sequin Machine for Embroidery Design:
Feature of sequin machine for free embroidery designs is described here shortly-
Sequin Stitch
Sequin machine make embroidery digitizing,
Sequin embroidery make the embroidery standardization,
Change according the free embroidery designs automatically when in embroider,
Auto trimming after finished embroider one color or area ,
Should support DST. DSB and ZSK design format,
Auto or hand embroidery designs upgrade the foot press when in the change of cloth,
USB device facility for transferring free embroidery designs ,
NIC port facility for transferring free embroidery designs ,
RS 232 port for for transferring free embroidery designs ,
