Segregated wastes are finally disposed of when they are no longer required. Disposal procedure depends on waste category. Some wastes, such as chemical wastewater requires treatment by ETP (Effluent Treatment Plant) and some require simple disposal procedure such as dumping on landfilling site. On the contrary, some other wastes are reused and recycled. In the following tables, we have mentioned all the wastes and their disposal procedures-
Accumulated list of wastes & disposal procedures:
Error is a part of decision or action. Corrective actions must be taken to rectify previous faults or lacking. Slight mistakes or faults in procedure level may hamper total development process. So corrective actions must be implemented properly and regular follow-up is very crucial. In our Review Meeting every waste management procedure is scrutinize thoroughly.
Methods of waste management – Fabric processing is a continuous process to run. One process is followed by another. Raw fabric is produced from yarn. Afterwards, this raw fabric is processed and finished to make complete garment fabric. Engagement of huge chemicals, dyes and water results complete fabric. Therefore, generation of waste follows every step of fabric production. We need ETP Audit Report
There are other sources of waste, which are not directly associated with fabric processing, but they help to run and control the production cycle. These sources are like Human Resource Development (HRD) Department, Maintenance Department, and Store Department etc. In the following tables, we have gathered the lists of almost all wastes generated from all sections or departments
Waste management is a big issue for any organization. No single department or section can handle this giant job all alone. Therefore, we have an Environment Management Team (EMT) to deal with environmental issues such as waste management. The main job of this team is to integrate all necessary people from all concerned departments in a single platform so that they can think alike regarding environmental management system. The existence of this team has made the job easier for Auto Textiles Ltd. to establish a better water management system.
Department of Environment (DOE) has formed some specific norms and regulations for industrial sectors regarding environmental pollution and control to keep the environment healthy. These rules & regulations are followed as general guidelines all over the country. We respect these rules and we are already following to comply with national rules, regulations and law. It is very difficult to run business in an environmental manner in a country like Bangladesh where lack of awareness and technological backwardness are never ending problems to deal with. Moreover, a better waste management system is only possible after combined integrated efforts from all concerned departments. Firstly, we have classified our wastes according to their nature & properties. Afterwards, we have enlisted all the wastes from all departments or sections we are dealing with. Then, we have decided the right disposal procedure for each waste. , we have already taken some research & development initiatives for the best wastewater management. However, we are putting all are combined efforts to manage our wastes. The followings are the procedural measures that we are following to materialize better waste management system:
Industrial Waste Management -Waste management is a big challenge for any organization.has developed some principles in relation to waste management so that things become systemic and easier. Those Methods of Waste Management are as follows-
Source Reduction / Prevention: Reduction or preventing waste generation from the very beginning of the production process is perfect better waste management. Reduction is using items or materials with care to reduce the amount of waste. Source reduction methods involve changes in manufacturing technology, raw material inputs, and product formulation.
Reuse: Reusing involves the repeated use of items or parts and materials which still have usable aspects. Checking, cleaning, repairing, and refurbishing whole items or spare parts minimizes waste and increases economic efficiency substantially.
Recycle: Recycling means using generated wastes as resources or secondary materials for making further products or materials. Recycling helps to save energy, resources using materials again, and turning wastes into new substance or products.
Resource Conservation: Resources, both natural and manmade, are limited though its demand is always increasing. Best Environmental Practices (BEP) should be encouraged & implemented for sustainable business activities. Therefore, better practices of waste management may help us to save our resources and energy largely.
Industrial Waste Management Segregation: Wastes may become resources if properly utilized. Wastes need to segregated or separated according to their types and property to reuse or recycle. Some wastes are hazardous and some are low or semi hazardous. Hazardous wastes require specific treatment or disposal procedure other than non-hazardous wastes. Hazardous wastes may contaminate or deteriorate the potential of reuse or recycle of other wastes. That is why proper waste segregation is necessary for better waste management.
The above-mentioned principles are followed and considered whenever any decision & action is taken regarding waste management.
After huge production, huge resonsibility falls upon our shoulder to manage it. However, ATL is committed to follow the guidelines of Environment Conservation Act, 1997 (ECR’97) and its own Enviroonment Management System (EMS) with a view to maximize the use of resources, minimize waste generation and manage various wastes properly in its own premises. Describe Methods of Waste Management
Development is continuous process and production of products & goods cannot be hampered drastically to minimize or stop waste generation. Waste generation cannot be ignored rather it has to be managed accordingly. As a Environment Concerned unit, is committed to engage all necessary efforts to manage wastes to keep the concerned stakeholders & environment clean and sound. We hope that we would be able to integrate our production activities and form an Environment Management System for the best waste management in the industrial neighbourhood. The main pillars of the waste management system are mentioned below–
Comparison with the best:
Evry concerned about environment, health & safety. We are doing our best to do our business in an environmentally friendly manner. There are other business concerns, which are burning examples of Best Environmental Practices (BEP). Our buyers and government authorities often show us the best ways to manage our wastes. We always compare ourselves with the best so that we can figure out our weakness and opportunity in order to develop environmentally friendly business manners and keep our environment cleaner & healthier than others.
Statement of the issue:
Various types of raw materials, chemicals, dyes are used to process raw fabric. The more materials are used, the more wastes are generated every day. We always try to figure out where and how waste can be minimized and what should be the proper disposal procedure. Accurate and complete information helps to take proper step regarding any management action let alone waste management. What is not measured cannot be managed. There are different properties and parameters to measure the concentration and pollution extent of waste. Therefore, proper record keeping of wastes and availability of necessary information are very crucial in better waste management.
Analysis of Waste Management Issue:
Nowadays almost all the organization around the world are more or less aware of environmental responsibilities. Various movements regarding different environmental issues are being carried out by different profit & non-profit organizations who work for the wellbeing of the environment- home and abroad. We always welcome recommendations coming from buyers and other organizations. We evaluate the recommendations and implement where it is possible to apply them. We have established a waste management system to manage all our wastes. We try our level best to deal with any waste related issue. Whenever we face obstacles or issue, we ( the Environmental Management Team) sit together and discuss about the present or upcoming issue. After brainstorming & analysis of the topic, we try to figure out the possible & viable solution from the several options.
Initiatives taken by other textile enterprises
This above-mentioned planning process is followed by our Environmental Management Team to form and run a better waste management system. Waste Management is a lengthy initiative, which cannot be established so quickly. There may be other organizations, which are very cautious about environment and exercise good waste management practices. We follow them to develop or improve our own management system.