Seal the penetrations using appropriate fire rated material and the cables are not stressed while in touch of concrete. Provide cable ladder or tray to support and protect the cables. Use steel or PVC conduit or cable tray with cover to ensure the mechanical protection of the cables laid on floor otherwise cable insulation may damage due to falling object or stepping of occupants onto it.
i.e. Red, Yellow and Blue colors for phases; Black for neutral and Green for earthing. Panels including its door should be earthed with better earth continuity.
Adjustable MCCB, Electronic Control Module EM66CP4.2, ACB and Grounding.
Coolant Temperature sensor.
2) Temperature sensor for the Air Intake Manifold.
3) Magnetic Pickup (RH side of Flywheel Housing.
4) Oil Pressure Sensor.
5) Atmospheric Pressure Sensor .
6) Primary Speed/Timing Sensor.
7) Secondary Speed/Timing Sensor. 8) Air Inlet Manifold Pressure Sensor.
02
Generator CATTER PILLER , Model:GEP700-1
Install steel or PVC conduit to ensure the mechanical protection of the cables laid below working table otherwise cable insulation maydamage.Adjustable MCCB, Electronic Control Module WIZ33ARD1.0, ACB and Grounding.
Coolant Temperature sensor.
Temperature sensor for the Air Intake Manifold.
Magnetic Pickup (RH side of Flywheel Housing.
4) Oil Pressure Sensor.
5) Atmospheric Pressure Sensor.
6) Primary Speed/Timing Sensor.
7) Secondary Speed/Timing Sensor.
8) Air Inlet Manifold Pressure Sensor.
Generator Protection system:
Install panel base plate and make circular hole at the base plate and install cable glands Audit ing to the respective cable size for cable entry and
exit. Over Current relay, Multifunction relay and earth fault relay Controlled by Electronic control Module
ACB of LT Panel:
Including microprocessor controlled adjustable thermal overload and adjustable electromagnetic short circuit releases.
Protection of against overload with inverse long time delay trip.
Conclusion
Generator Protection of instantaneous short circuit with trip current threshold. Existing cable on concrete floor must be supported in covered cable trays or laid in trenches to prevent any physical damage. Metallic cover (preferably checkered plate) should be provided on the cable trench. Excess length of existing HT cables coiled near transformer or panels must be protected and laid safely.
To The Secretary, Bangladesh Energy Regulatory Commission, TCB Bhaban, 1 Karwan Bazar, Dhaka-1000.
Application for small CPP category license.
Sir, Please refer to your Memo No. BERC/JJK dated 17th January, 2018 and our application Issue No. 2018 dated 26.10.2018. I am Mazful Islam the of Auto Garments Ltd. have applied for BERC CPP license. Disconnect the power source of the cable laid into channel and clean dust and debris of all interior components. Establish a periodic cleaning program and maintain records of the activities. Provide cover made of noncombustible material on the channel for preventing ingress of dust and debris in future. In this connection, BERC officially reviewed the submitted documents and application and found some incomplete documents submitted by my representative, in this circumstances, we made our all incomplete documents updated which are attached for your kind attention and submitting to BERC for further process.
We hereby certify that the information contained in the documents submitted herewith is accurate to the best of our knowledge.
Your cooperation will be highly appreciated for acquiring the small CPP license as soon as possible for running our business smoothly.
Thanking you,
Attached:
Boiler Remove from Ground Floor
Roof Top Free 18%
New Building furnishedCopy of application for DoE clearance certificate.
According to Mass-Circular of BERC (Bangladesh Energy Regulator Commission) refers their rules of 2003 section 27 & 28, all party must have to collect License or Waiver Certificate from BERC by 31 July, 2018. In this regards we need to apply for License or Waiver Certificate for rest of our Generator Checklist which are still not applied.
SL NO.
Generator Commissioning Checklist Description
Date of commissioning
01
Generator CATTER PILLER , Model: C186335, Prime power 1500 RPM, 50HZ, 400/230 Volts, Country of Origin USA, Local Supplier Bangla Trac Ltd.
12 February , 2018
02
Generator CATTER PILLER , Model: GEP700-1, Prime power 1500 RPM, 50HZ, 400/230 Volts, Country of Origin USA, Local Supplier Bangla Trac Ltd.
26 September, 2018
Attachment :
Commissioning Report of Engine Model no- C-1558
Commissioning Report of Engine Model no- GEP00700-1
HEAT RATE OF EACH GENERATOR
Sl. No.
Description of Generator
Heat Rejection Particular
DM9823
01
Generator CATTER PILLER, Model: C1800635
Following programs and test results are not conducted and kept.
1.Maintenance program (periodic inspection and
testing program)
2.Thermographic scanning inspection report of
electrical equipment (tri-annual base)
3.Electric safety program (training on electrical
safety)
Heat Rejection to coolant (total)
165KW
9384 Btu/min
Heat Rejection to exhaust (total)
487KW
27696 Btu/min
Heat Rejection to after cooler
91KW
5175 Btu/min
Arrange periodic inspection & thermal scan to identify the overloading, loose connection, unbalanced load which may cause the excessive heat-rise and take action Audit ingly.
Heat Rejection to atmosphere from engine
83KW
470 Btu/min
Heat Rejection to atmosphere from generator.
319KW
18141 Btu/min
02
Generator CATTER PILLER , Model: GEP70000-1
Exposed flexible conduit must be run either horizontally or vertically and not at an angle
Same as above
Application for Generator Commissioning Checklist
The Chairman,
Bangladesh Energy Regulatory Commission
TCB Bhaban (3rd Floor)
1, Karwan Bazar, Dhaka-1215
Dear Sir,
We hereby request you to kindly issue a license waiver certificate for KVA power generation at the location mentioned in the application form.
We are providing herewith the required information and attested copies of the documents along with the application form.
We are paying herewith Application Fee as mentioned bellow:
Amount (in Taka): BDT. 20000.00 (In words): Taka Two Thousand Only
Demand Draft/pay order no: (For Bank outside of Dhaka city Only DD will be accepted)
Date of payment:
Name and Branch of the Bank: IFIC Bank, Gulshan Branch, Dhaka We hereby certify that the information contained in the documents and mentioned in the application form submitted herewith are accurate and complete to the best of our knowledge.
Thanking you,
Yours Sincerely,
LIST OF DOCUMENTS & PAPERS FOR WAIVER CERTIFICATE OF GENERATOR
Original Catalogue of Generator.
Copy of Article of Association & Memorandum of Company.
This is Laura-the new sales manager from Wuhan Nobeth Steam Generator company. Wuhan Nobeth Machinery Manufacturing Co.,Ltd. is a professional factory which was founded since 2000 in China. Nobeth is one the best manufacturer of special equipments in China. After 18 years’ development. We have full range of steam generators for different applications. Our products cover full automatic steam generator, chemical reaction kettle, full automatic gas steam boiler, oil steam boiler and biomass pellet boiler. Also we are able to provide our customers different choices. Like high temperature steam boiler and high pressure steam equipments. During the past 18 years, we have acquired a number of patents, which makes us one of the best suppliers of steam machine in China. All our products have passed IS0 9001:2015 and CE Test , we are proud to serve you with our products.
Specified on Steam Generator:
1.Electric heating steam generator
2.Oil fired steam boiler
3.Gas fired steam boiler
4.Biomass wood grain of boiler
5.High pressure /high voltage explosion-proof/high temperature boiler and all kinds of steam generator parts.
Certification :CE 、ISO9001 、Manufacture License of Special Equipment
We are finding different companies in different countries to be our Wuhan Nobeth steam generator agent to sell our products in located market.If you are interested,pls contact with me. Steam Generator Sale
Diesel Generator Service since the year 2000, Powertrade Energy have been engaged in supply and service of industrial diesel & gas generator in different business sector all-over South-East Asia and Bangladesh. We have sold thousands of SCANPaC generators and in Bangladesh about 650 “SCANPaC” units were sold through our agent and some direct orders, and have been powering, hospital, buildings, residence, hotels retails, TV station, Factories. To further expand our business, we have established our branch office in Bangladesh with full sales, service and support team. We are committed to provide 24×7 round-the-clock service of exceptional quality. We take immense pride in our quality of service and strive to lead by our examples. We take great care in ensuring that our clients find the right products from our huge selection of engines, alternators and spare parts.
Factory is connected to two gas generator having capacity 1MW each as the main source. The factory is also connected to grid supply (REB) tapped from two 11kV overhead line feeders. A 1MW diesel generator is connected as standby power source. The 11kV grid supplies are stepped down by one independent 3-phase, 37.5kVA power transformers. The output from one of the transformers and standby diesel generator are connected through COS with LV bus.
We have following products to offer you :-
a) SCANPaC brand diesel Genset (10 Kva to 3000Kva diesel Genset set, powered by Perkins,
Cummins, Volvo, Scania, John Deere, etc.)
b) Shengdong brand low rpm natural gas, syngas and bio gas generating set
c) Genuine engine spare parts. (Volvo, Scania, Perkins, Cummins, John Deere & Shengdong)
d) Used Genset 10 Kva to 2000Kva at very competitive price with warranty and service support
e) Rental and portable silent generator (20Kva to 2000Kva) at very competitive price
f) Service, maintenance and overhaul of power plant
g) Design, supply & installation of acoustic equipment
The total risk index figure is above 40, it is advised to incorporate lightning protection system considering the importance of the building structure. However, factory management informed that lightning protection system had been installed considering safety of the factory building. During inspection, four lightning protection device was found installed at the roof top
If you have any inquiry, please feel free contact with us.