We commit to comply with Eco Cotton Requirements as listed below,
and to take the responsibility for informing all our suppliers and
subcontractors about the content of these requirements and to make sure that
they also comply.
Only Eco cotton fibre, certified according to both EEC Regulation No. 2033 and NOP (American National Eco Program), has been used for buyer Eco cotton orders.
All factories (from spinning to
garment) in production has to be certified according to OE 100 / OE blended
standard with valid expire date has been used for buyer Eco cotton orders.
All dyeing and other processes
are in accordance to:
buyer Chemical Restrictions
buyer Supplier Colour Guide
Book
buyer Quality Standards and
Requirements
Dye mills and other wet process
units have waste water treatment according to relevant legislation of the
county in which they operate.
The
whole production of Eco cotton garments shall be organized in a way that
contamination of the Eco cotton fiber/fabric is prevented. All materials must
be clearly labeled and identified as Eco throughout the entire production chain,
according to OE 100 and blended standards.
A Transaction certificate prepared by certifier must be given to buyer
for each and every order. The transaction
certificate shall state that the H&M order has been produced with 100% Eco
fibre or as much as specified on the order (95%-100 or 50%).
Lap Former Machine of spinning mill is used for lapping cotton and forming compact lap from drawn sliver by drawing & drafting to feed the combing machine. The lap of 30 inch wide is wound on to bobbin and cotton wool. The lap former machine is not use in the carded yarn process because it is used for lapping yarn by lapping process. Former meaning make laps of various counts for Carding Machine of textile industry.
Application of Lap Former Machine for Lapping Process:
This machine is used for lapping process wool and further opening and impurity separating cotton human made fibre blend and midlength chemical fibre balow 77mm and making the lap and lap joint of various counts for carding machine.
Lap Former Machine Parts
Specifications of Lap Former Machine:
The specifications of this machine is stated below shortly-
[label type=”label” title=”Specifications Name“]
[label type=”label” title=”Specifications Value“]
Product Category
Spinning
Machine Category
Lap Former
Product Name
Lap Former Machine
Product Model
According to Manufacturer
Product Class
New
Origin
China/India/Others
Brand/Manufacturer
Name of Manufacturer
Agent In Bangladesh
No/Yes
Power
9.7Kw
Temperature
Normal
Certification
SGS/Others
Production Capacity
1000 Set/Sets per Month
Machine Width
1060 mm
Tine Of Lap Forming
365457 min
Output
250 Kg/hr
Pressurizing
Weight
Cotton Diameter
365-457 mm
Punching Diameter
3.18-5.83 mm
Cotton Roller Diameter
230/10-13 mm
Combined-Beater Diameter
406-900 1000 mm
Dimensions (L×W×H)
3745×2710×1520
Weight
4300 Kg
Description
The machine is applicable for the raw cotton of all classes or chemical fiber. It is used for cotton wool
Cotton Lapping Process:
Flow char of cotton lapping process during whole carding procedure is shown below-
First Cotton Bale Process
↓
Blow Room Process
↓
Lap Process
↓
Carding Process
↓
Carded Silver Process
↓
Drawing Process
↓
Drawn Silver Process
↓
Simplex Machine Process
↓
Roving Process
↓
Ring Spinning Process
↓
Spinning Bobbin Yarn Process
↓
Winding Process
↓
Finally Cone Process
Cotton Wool Spots Removing Process:
After making fiber by lapping process the fiber exits some spots. The cotton wool spots removing process are described below-
Sufficient amount of water
↓
Fiber was loaded after lapping process and run for 10 min.
↓
Drain Process
↓
Sufficient amount of water
↓
Acetic acid was included for 4 min.
↓
Wetting agent included for 4 min.
↓
Run for 8 min. at 70 C
↓
Rinse for 10 min.
↓
Drain Process
↓
Required amount of Water
↓
Acetic acid included for P – controlled
↓
Check P at 4.6
↓
Enzyme included
↓
Run for 1 hours
↓
Shade checking process
↓
Rinsing for 10 min.
↓
Anti crease was included up to 5 minute
↓
Leveling agent included for 5 minute
↓
Run for 20 minute at 80 C”
↓
Rinsing up to 10 minute
↓
Acetic acid included for P – controlled
↓
Checking P at 6.5
↓
Softening agent injected for cotton wool spots removing process
