Dimensional Stability to Laundering
All fabrics (Knits & woven)
Length: ±3.0%
Width:
±3.0%
AATCC TM 135
TP 35 or
TP 36
Spirality
Single Weft knits & French Terry
(E.g. Acceptable for a 50 cm garment, if
before wash=7, after wash=3, Total =10)
51- 75cm garment length
Greater than 75cm garment length
Total Spirality: 9º max
Before Wash: 6º max
After wash: 4º max
Total Spirality: 8º max
Before wash: 5º max
After wash: 3º max
ISO 16322-2
TP 30
Fabric Weight (g /m²)
As Specified, Tolerance ±5%
ISO 3801
TP 20
Knit Fabrics -Pilling
All weft knits including Polar Fleecy
But excluding 100% Cotton,
Cotton/Elastane blends and all fabrics with a Brushed/Pile surface on garment
face side
After washing:
Rating: 3-4
ISO 12945-1
TP 60
Knit Fabrics -Stretch Properties
– To be met for all fabric fibre
compositions including elastane blends
Knits
Fleecy (Brushed & Unbrushed)
French Terry
Ponte de Roma
Length Stretch: 20% min
Residual Ext: 10% max
Width Stretch: 60% min
Residual Ext: 30% max
Length Stretch: 15% min
Residual Ext: 10% max
Width Stretch: 30% min
Residual Ext: 10% max
Note: These requirements are guidelines
only, the stretch properties obtained and approved during the sampling stage
and fit approval shall be used as the reference standard.
BS EN 14704-1
(modified – single load cycle only,
residual determined after 60s.
30N load required)
TP 50 /TP 51
Cont. Mandatory Physical Test Requirements
EVALUATION
MINIMUM
REQUIREMENTS
TEST
PROCEDURES
TEST
METHODS
Pilling – Woven Fabric
(Martindale Test Method)
Synthetic & Synthetic Blends only
After Wash
Rating: 3-4
ISO 12945-2
(modified- self fabric to self fabric)
He is Top Class Digital Marketing Expert in bd based on Google Yahoo Alexa Moz analytics reports. He is certified IT Professional from Aptech, NCC, New Horizons & Post Graduated from London Metropolitan University (External) in ICT . To Hire his service and Him make a comment in below of any articles, Cell# +880 1792525354
One comment
Pingback: List of Textile Lab Equipments | Auto Garment