Electrical Tools Set for Maintenance Department

Electrician Tool Set

The ensure provision and maintenance of Electrical Tools Set in safe condition of correct tools and furniture for respective application to enhance quality of workmanship and reduce risk of injury.

• Air Filter (APS) Pneumatic
• Belt -1950x8x28mm (Diesel Generator)
• Electrical Tools irclip Lock -14
• Circlip Lock -16
• Circlip Lock -18
• Circlip Lock -20
• Holder of the Tools:
• Department / Section:
• Chisels
• Heads safe-ended or dressed
• Cutting edges sharp and square
• Files
• Tangs protected with handles
• Teeth Sharp and clean
• Hammers
• Handle smooth and clean
• Face of head smooth not mushroomed
• Screwdrivers
• Handle smooth and clean
• Bits sharp and square
• Wrenches
• Jaws sharp not spread
• Right type for the job
• Any other Tools ( write name below )
• Circlip Lock -22
• Chain Lock 25 Half
• Chain Lock 25 Full
• Cutting Disk 4″x1.2mm
• Welding Road 10 No Vortic Marin
• Drill Bit 3mm
• Drill Bit 3.2 mm
• Drill Bit 4mm
• Torch Light 12″
• Thermocouple -2 meter (APS)
• Cooling Fan 5″
• Volume 502 K ohm
• Capacitor 4 UF
• Capacitor 3.5 UF
• Proximity sensor round NPN, 18mm(PR 18-5 DN)
• Cable Lux -6 Rm (APS)
• 13A 03Pin Three Pin Plug
• Kona Switch
• Proximity NPN NO (Squire)
• PIB tape (original)
• Solid State relay 40 DA- H 40 A INPUT 3-32V DC
• Halogen Light 400watt china
• Halogen balast 400watt
• Philips 100w
• Philips 60w
• Drill Bit 5mm
• Drill Bit 7mm
• Drill Bit 8.5mm
• Drill Bit 10.2 mm
• Drill Bit 10.5mm
• Drill Bit 12 mm
• Drill bit 13mm
• Electrical Tools Drill Top 2”’
• Drill Top 2.5”’
• Drill Top 3”’
• Drill Top 4mm-
• Drill Top 5mm
• Drill Top 6mm
• Drill Top 8mm
• Drill Top 10 mm
• Drill Top 12 mm
• WD-40
• Gauge Glass Boiler 50x8mm
• MS Elbow 2″ W/T
• Non Return Valve 50mm (Boiler)
• Puller 8″
• Sly range 8″
• Jewelry File
• Cutting Player 8″
• Nose Player 8″
• Chain/Chisel 10”
• Sly range 6″
• Allen Key set (one side round)
• Allen Key 5mm
• Hammer 1/2 Lbs
• Oil Can
• Flute Gauge (for Deep measurement)
• Pneumatic grinding tools
• Hardness Test Kit
• Socket 8mm (12Pole)
• Socket 12mm (12Pole)
• Socket 16mm (12Pole)
• Socket 17mm (12Pole)
• Socket 22mm (12Pole)
• Socket 24mm (12Pole)
• Socket 8mm (06Pole)
• Socket 9mm (6Pole)

Specialty at a glance of our product: 

• Original Products
• Best Print quality
• Absolute and pure Black print
• Tracing print guaranteed
• Compact air bubble bag
• Office delivery as per your demand

Electrical Tools , Garden tools and Furniture

• Proper handtools to be provided
• Handtools provided to be listed
• All tools to be kept clean
• Handtools Gardentools to be checked for proper conditions at regular intervals
• Bad tools to be rejected and promptly replaced.
• Makeshift or home made tools not approved by the company should not be allowed.
• All tools to be kept in their assigned places, cupboards boxes or racks to be provided.
• Furniture provided to be suitable and strong enough for the job and well maintained.
• Broken furniture to be promptly repaired or replaced.
• Handtools to be checked if in proper condition during entry
• Handtools brought in to be listed.
• Bad tools/ Makeshift home made tools should not be allowed.
• All tools to be kept nicely in bags or boxes / cup boards if left overnight.
• Files should not be without handle.
• Chisels must not have mushroomed head.
• Hammer handle must be fixed properly and should not be broken.
• Screwdriver point to be sharp and square.
• Wrenches jaw to be sharp not spread.

Terms and Conditions:

Delivery:The delivery of the goods will be made from ready stock after receiving the Work Order.

Payment:Payment to be made upon delivery of the goods.

VAT & Taxes:Price is exclusive VAT & TAX.

Validity: This quotation is valid up to “10 days” from the offer date

Qutation for Electrical Tools