Lectra software is used for making sewing pattern, vogue patterns, mccalls patterns, simplicity patterns, butterick patterns and others necessary pattern according to buyer requirments. We are trouble shooter of fashion industrial software like Willcom, Barudan, Lectra, Gerber, iEcho, Lectra Plotter I Manager Software, Datacolor, Shedomaster, Batch, Qc etc. Lectra products have FLEXlm HOSTID which can also access a .lic file through a network under the Lectra FLEXlm Server license server. When anybody use lectra products with a networked license, or a floating license, he or she should share licenses with other users on the same network. There are four kinds of FLEXlm or flexlm -96 HOSTID developed by lectra. The ids are
FLEXid number
BlueKey number
GreenKey number
MAC address
FLEXid Number:
The FLEXid number is a Dongle Key connected by USB port. All FLEXid has an unique number where the numbers can be recovered by lectra tools. If these tools are not available than the external number written on the Dongle Key can be used to obtain a license, they should be identical.
FLEXid Number
BlueKey Number:
BlueKey number is a special type of dongle that is connected to the USB port. All BlueKey has a unique number. This number can be recovered with Lectra tools. If these tools are not available, the external number written on the Dongle can be used to obtain a license, they are identical. This consists of a prefix (1-),followed by a number
BlueKey Number
GreenKey Number:
A GreenKey number is a different type of Dongle that is connected to the serial port of a Workstation. GreenKey also generate a unique number. This number can be recovered with Lectra tools. If this tool is not available, the external number written on the Dongle can be used to deliver a license, depending on this external number, the GreenKey HostId can be retrieved
GreenKey
MAC address:
A MAC address is used by NIC- Network Interface Card that generate a unique number for each. Generally this device also called ethernet card that have 12 character code consisting digits from 0 to 9 and letters from A to F.
MAC Address
Installing a FLEXlm HOSTID by LectraFLEXlm Tool:
All lectra products need to install the Lectra FLEXlm tool. The installation procedure of this tools are given here. The flexlm download is easier from internet.
First click Start Menu
Then click All Programs
Then click Lectra
Then click Tools
Then click FLEXlm. After that the following window will be displayed
Anybody can be saved HostId in a file by using the button numbers
The FLEXid license number is showed only when required driver is installed. The driver is installed automatically during the installation of Lectra Modules.
For GreenKey, the port selector allows users to change the serial port to which the GreenKey is connected. The button can be used to search for the port automatically.
Installing a FLEXlm HOSTID without LectraFLEXlm Tool:
Installing a FLEXlm HOSTID without LectraFLEXlm Tool by using a MAC address
FLEXlm HOSTID without LectraFLEXlm Tool
First click Start Menu
Then click All Programs
Then click Accessories
Then click Command Prompt
When a black window appears, type in ipconfig /all
After typing ipconfig/ all press Enter
Then find the 12-character code to the right of the physical Address (for example: 00-E0-29-1C-3D-87
Then remove the dashes from insight the address for example: 00E0291C3D87
Obtaining a FLEXid number
The flexlm license server number is written on the key just after the text FLEXid =
It begins with the number 9 followed by a dash, for example 9 -41EDBB01
The text written on a Dongle looks like this:
HASP4 M1 133-4bC
FLEXid = 9-41EDBB01
In this case the FLEXid number is 9-41EDBB01
License for Single Workstation:
In Windows Vista or Windows 7 workstations the file path is C:\ProgramData\Lectra
\Licenses directory.
Installing Procedure in Single Workstation
First click Start Menu
Then click All Programs
Then click Lectra
Then click Tools
Then click Settings.
Then a window appear
Then Double click on the Licensefolder to open license server
Then copy the license file by dragging and dropping it into this folder
Installing Procedure in Networked Workstation
First click Start Menu
Then click All Programs
Then click Lectra
Then click Tools
Then click Settings.
Then a window appear
Double click on the folder corresponding to the application
Then double click on the txt file. This opens Wordpad to allow you to modify the file name
The first line is to be replaced by the name of the computer that is the license server, using the following format: @<computername>; for example if the license server is Server1 the line must be @Server1
Before installation this software FLEXlm licenses manager is mandatory to complete the installation. If we install lectra modaris V7R2 some necessary modaris lectra software will install at a time. Other necessary lectra softwares are Modaris V7R2 and Documentation, Modaservice V7R2, ButtonBox V1.1, Digitizer V2.1 and JustPrint V2R2. Close all application before install lectra pattern making software. Hardware requirements : CPU- Intel dual core > 2.2 GHz for Modaris Classic ( 2D ) and Intel core I7 quad for Modaris Expert 3D, RAM- 4 GB for Modaris Classic ( 2D ) and 8GB minimum for Modaris Expert 3D, Graphic card-ATI or NVIDIA recent cards with recent OpenGL version for Modaris Expert 3D, HDD- 3 GB for installation of the application and components and OS- Windows 7 (Sp1). After installing Lectra Modaris you can Install Lectra Diamino V6R1 marker making software.
We are agent of all Garment and Textile ERP Software company. We will forward you to the best ERP software company based on your requirements. We are trouble shooter of fashion industrial software like Willcom, Barudan, Lectra, Gerber, iEcho, Datacolor, Shedomaster, Lectra Plotter I Manager Software Batch, Qc etc. Email: autogarments@gmail.com, Cell: +88 017 92 52 53 54
Then click Modaris Installation You can download Modaris Installation exe from internet.
Or open and click Package Folder then click exe file ModarisV7R2
Then click Install
After installing necessary file click Next
Click Next Button
Then select I accept the terms of the license agreement
Then click Next
Then a window appears offering to install your license. If the license files are in a different folder install it later.
Then click Next
Then select Typical / Custom and click Next
Select Software Module
Then click Install
Then click Finish
Then open Install license
Run lectra pattern and other applications and enjoy.
Finally if you face any problem to install the software please contact us. We will help you. Email: autogarments@gmail.com, Cell# +8801792525354
Initial Configuration of Modaris:
If you defined a specific configuration for the following parameters in the previous Modaris installation, you will need to define it again after installation, using the appropriate functions of the Modaris interface:
the Menu configuration if the display is in text mode and not icon mode.
If you defined another configuration following certain procedures in the previous version of Modaris, you should apply the same procedures to adjust the configuration of Modaris V7R2, or you should contact your call center to ask for assistance with defining your Modaris configuration.
Uninstalling a previous version of Modaris :
It is not recommended to have Modaris V7R2 and the previous version of Modaris together on the same workstation. When configuration is complete and Modaris V7R2 is operating correctly, uninstall the previous version of Modaris.
Open a Windows session with an Administrator account or a user account with administrator rights.
Depending on how your workstation is configured, go to: “Start->Control Panel” or “Start->Settings->Control Panel”
In Vista and 7, select “Programs – Uninstall program”
In XP, select “Add/Remove programs”
In the list of Currently Installed Programs, select the previous version of Modaris, click on “Change/Remove” and follow the instructions.
Other Supported Operating Systems :
Windows 7 Enterprise 64 & 32 bits (SP1)
Windows 7 Professional 64 & 32 bits (SP1)
Windows Vista Enterprise 64 & 32 bits (SP3)
Windows Vista Professional 64 & 32 bits (SP3)
Windows XP Professional 32 bit (SP3) (2D only, not recommended for 3D use due to performances and instability)
MAC OS-X 10.5+ (Snow Leopard, OS-X Lion) with Virtual Environment Fusion version 4.0.2, Parallels Desktop V7 in case of heavy client modules. Windows 7 64 bits is a pre-requisite (see in SIB 5.4 chapter “Consideration for Mac use”
For combinations of 32-bit Windows operating systems (EXCEPT XP) with 3 GB of memory or above the accessible memory may be reduced to 3 GB or less (depending on system configuration).
Limited Windows® XP support. Microsoft discontinued Windows® XP certification on system level, basic drivers are often provided by the hardware manufacturer; refer to the manufacturer for specific recommendations.
You can compare this with your computer hardware characteristics, which you will find in this window:
Depending on how your workstation is configured, go to: “Start->Control Panel”
or “Start->Settings->Control Panel”
in Vista, 7, select “System and Maintenance”
Launch “System”
Licenses:
If you did not install the license files when installing Modaris and its components, you must install them on your workstation when you receive them. To do this, click on the “Install license files” button below and follow the procedure.
Select “Yes” or “Run” whenever you are asked for confirmation.
Select “Browse” to select the folder containing the license files,
Then click on “Copy Files“.
A message tells you how many license files were found in the folder and copied.
Click on “OK“.
Configuring Lectra Workstations:
The other Lectra workstations on which you use a Lectra application other than modaris lectra software must be updated with the latest versions of Modaservice and XChang. Lectra fashion designing software is very much essential for workstations. Procedure for other Lectra workstations for pattern drafting is as follows:
Exit all running applications for installing lectra software
Open a Windows session with an Administrator account or a user account with administrator rights.
Insert the CD for installing lectra modaris
Click on the “Update” button below
Select “Open” or “Run” in the next window.
Select “Run” or “Continue” in the next window.
Click on “Next” or “Install” in each window.
Conclusion:
Lectra is best fashion designing software for solid works. Lectra modaris download is easy for the customers. Lectra modaris download is possible by authorized user of lectra.
There are different types of cutting plotter software is developed for printing pattern marker. HPGL is the best driver to plotters correction of garments patterns and markers. Cutting plotter software has moving direction of the plotters nozzles correct. Output the width correction graphic file and measure the output line length in mm with the accuracy to 0.1mm. Subtract the standard length of 1,000mm and enter the result together with the sign into the width correction box.
If the measured value is less than the standard length of 1,000mm, enter a negative number, otherwise, a positive number (“+” sign can be omitted) into the box. See the Figurer below:
Plotters Correction in Width
Ploter Correction in Length:
It is types of paper-feeding direction. Output the length correction graph and measure the output line length in the paper-feeding direction in mm with the accuracy to 0.1mm of ploter. Subtract the standard length of 1,000mm and enter the result together with the sign into the length correction box. If the measured value is less than the standard length of 1,000mm, enter a negative number, otherwise, a positive number (“+” sign can be omitted) into the box. See the Figure below:
Plotter Correction in Length
The above two corrections should be made after the rectification of butt jointing, misplacement and nozzle clearance.
Ploter Correction in Butt Joint:
Output a test graph first by hpgl driver 70. If the case as shown below appears between two adjacent scans, enter a positive number (“+” sign can be omitted) in the butt-joint correction box in mm with the accuracy to 0.1mm. The value can be an approximate visual value (usually within 0.50mm) which should be accurate enough to avoid overlaps and gaps. The test image should be long enough to satisfy the accuracy requirement.
If the case as shown below appears between two adjacent scans of ploter, enter a negative number in the butt-joint correction box in mm with the accuracy to 0.1mm. The value can be an approximate visual value (usually within 0.50mm) which should be accurate enough to avoid overlaps and gaps. The test image should be long enough to satisfy the accuracy requirement.
This correction should take it as a reference to make the accuracy meet the requirement in the X direction (paper-feeding direction) on the test graph.
Plotter Misplacement Correction by free cad Software:
Output a test graph first. If the case as shown below appears between two adjacent scans, enter a positive number (“+” sign can be omitted) in the misplacement correction box in mm with the accuracy to 0.1mm. The value can be an approximate visual value (usually within 0.25mm) which should be accurate enough to make the lines basically straight by free cad software.
If the case as shown below appears between two adjacent scans, enter a negative number in the misplacement correction box in mm with the accuracy to 0.1mm. The value can be an approximate visual value (usually within 0.25mm) which should be accurate enough to make the lines basically straight.
Adjustment by Hpgl Plotter Software in between the Nozzles:
When you install or pull out the nozzles, you may need to make adjustment in HPGL.ini file of hpgl2 software when a coupling problem or misplacement happens.
First, output a test graph. If the case as shown below appears, increase the Nozzle_distance_y value in HPGL2.ini file of hpgl2 software. This value should always be an integer less than 150 at the largest.
If the case as shown below appears, decrease the Nozzle_distance_y value. This value should always be an integer not less than 135 at least.
If the case as shown below appears, increase the Nozzle_distance_x value in HPGL2.ini file of hpgl plotter software. This value should always be an integer less than 75 at the largest.
If the case as shown below appears, decrease the Nozzle_distance_X value. This value should not be less than 70 at least.
Note: Before running the INKJET plotters save hpgl2.ini file of hpgl2 software after modification.
Plotters Correction by Cutter Plotter Software :
Plotters correction of misplacement in between nozzles by print application software
Plotters correction of joints in between nozzles.
Plotters correction of misplacements in between two adjacent scans.
Plotters correction of butt-joints in between two adjacent scans.
Width correction by print application software
Length correction print application software
This software is used to print pattern maker file
For all the above-listed corrections, use the demo graphics files we provide and a precise ruler for the measurements. Click “Ok”to save the entry. It’s not necessary to make the adjustment very often to print the file of cutter plotter software. The best way is to make a backup record by print cutter plotter software
A marker requisition form is filled and sent to the CAD department for putting a request for the marker. This form includes the details of the marker that are needed along with the size ratios. The CAD department then releases the marker to the cutting department.The HPGL Viewer software is a printer drivers program to be used specifically for different types of plotters made by various manufactures with the functions of graph browse and plotting as well as plotter parameter setting and correcting. System requirements of Hpgl viewer software: Operating system : Windows XP/Windows 2007/ Windows 2008 and Peripheral port：Parallel port. HPGL program is green software and does not need installation. Any marker program can be started by double click on HPGL.exe printer drivers.
The main interface of hpgl printer drivers will appear as below:
HPGL2 and HPGL Viewer
2. Menu Description of Hpgl Viewer:
This section describes the program menu items of hpgl software are stated one by one briefly.
2.1. File Menu of Hpgl2 Software:
Open：Read and display hpgl/hpgl2 graphs. Close: Close the hpgl2 image being displayed currently. Plot: Plot the hpgl2 image being displayed currently. Resume Plot：Similar to “Plot” but continue the plot from the position of last stop. Exit：Stop the program.
2.2. View Menu of Hpgl Software:
Enlarge：Enlarge the image display scale by one time. Reduce：Reduce the image display scale by one time. Fit：Display the full view of the image. Zoom：Set image display percentage.
2.3. Tools Menu of Hpgl Software:
Auto Plot ： Automatically monitor a designated directory to plot the files (including the files added later) in it one by one. History：Check the plot history.
2.4. Language Menu of Hpgl Software:
English：Shift the language of the software to English.Simplified Chinese：Shift the language of the software to simplified Chinese.
2.5. Configuration Menu of Hpgl Software:
Plot Configuration：Configure the graph-related parameters. Plotter Configuration：Configure the plotter operational parameters.
2.6. Help Menu of Hpgl Software:
User manual：Display this manual. About：Software version and other information.
3. Plotting Setting in Hpgl File System:
This section describes hpgl file in detail the usage of the hpg12 software functions including the seven topics of language setting, plot setting, graph display, plotter setting-up, automatic plot and plotter rectification.
3.1. Setting Language
Click “Language” menu of hpgl file and select the desired language in the three popped-up menus. Click the corresponding submenu.
3.2. Setting Plot:
Click “Configuration” menu “Plot Configuration”. The below dialog box will appear. You can set the plot size and default line thickness in the dialog box. There are three ways to set up the plot size:
Hpgl File System
3.2.1. First Way:
The first way is to set the size by the PS instruction of the file. However, not all the graphics files output by the cad software have a PS instruction.
3.2.2. Second Way:
The second way is to select it automatically by the contents of the file. It will automatically find the coordinates range which all the plot instructions reach and set a rectangular outline border as the frame for displaying and plotting the graph.
3.2.3. Third Way:
The third way is to set the size by the user. In general, you should not select this method because it may cause voids to the graph or waste paper.
3.3. Default line Thickness:
The larger the line thickness you select, the thicker the lines will be and the faster the ink will be consumed. When the plot file is closed, the line thickness setting will be reset to 1 so that the next plot will not be affected.
4. Displaying An Image
Before this step, make sure you have made proper selection in the step to set the plot. Plot setting usually only needs to be made once. Just some special graphs need plot setting to be redone.
Click “ File” menu than click“Open” to pop up the dialog box and select the graphics file required as shown below:
After image selection, the image can be seen in the main window of the program. The default scale is to fill up the space in Y direction, i.e. the direction of the width because the plot width will remain unchanged in most cases but the length could be very long. To change the image display scale, use the four submenus under “Display” menu. When a new image is opened, the last graph will be closed automatically.
5. Plotter Setting for Pattern Making Software File
Click “Configuration” menu than click “Plotter Configuration”. The below dialog box will appear:
Hpgl2 file system
Plot Configuration contains the setting-up of rectification, translation, interface, memory and plotting behavior.
5.1. Rectification Setting:
This option has been set up by the manufacturer before ex fatory delivery and usually needs no modification. If it really needs a modification, please see “Plotter rectification” in pattern making software chapter.
5.2. Translation Setting:
When the cad software output an image, the coordinates of the image in the direction of width (Y direction on the screen) are relatively far off the origin. In that case, if plotting begins from the origin of the direction of width, the image may not be fully plotted.
The red box shows the space that can be printed out. As per the width of the image, it should have been printed out entirely, but it’s not fully printed out because the cad software outputs the image too far off the origin of the direction of width (the low frame of the red box in the above figure).
Translation setting is to make the settings to translate the image downwards for full printout. There are two ways:
5.3. Automatic Translation:
The program checks the width of the image and the coordinates offset. When the width of the image is inside the plotting range but the coordinates offset is too large, it will automatically translate the image to the place near the bottom before plotting.
5.4. Manual Translation:
The downward translation of the image will be designated by the user. If part of the image can not be seen due to the translation. The software will prompts:
Because manual translation is only needed for a very few plots, the value of manual translation will be rest to 0 whenever the current graph is closed.
5.5. Interface Setting:
Select the interface the hardware needs to connect with the PC. At present, the only mode is to connect through a parallel port.
5.6. Memory Setting:
Usually, 50K to 100K will meet the need (ex-factory configuration is 2M). In case of a large batch plot ( for example, send the plot job to the plotter before going off work and leave the plotter working with the PC not being controlled by a operator), the memory can be set to a larger value.
5.7. Plotting Setting:
This includes the setup to delete the file or not after plotting and the setup for the number of times to plot one graph. The number of plotting times will be reset to 1 when the graphics file is closed so that it will not affect the next plot.
6. Plotting by hpgl plotter
When a graphics file is opened correctly, the plotter will plotting by hpgl plotter out the opened image in the two ways, direct plot and resuming plot.
6.1. Direct Plotting:
Click “File ” menu than click“Plot” to pop up the dialog box which displays the plotting progress as below:
Plotting Setting
Click “Cancel” to interrupt the plotting and “Pause” to pause the plotting. When plotting by hpgl plotter is paused, you can click “Resume” to continue the plotting.
If an interruption is man-made or due to ink-out or other reasons, the below dialog box will appear in hpgl plotter screen when trying to re-plot the same file
The plotting interruption distance of hpgl plotter will be automatically filled in at the “Start point”. If required, the value of the start point can also be manually entered. Click “Ok” to continue plotting at the “Start point” and click “cancel” to start the plot from the very beginning.
6.2. Resume Plotting:
Click “File” menu than click“ Resume Plot” to start the function which differs from direct plot in always popping up a dialog box to have the user select the start point even if the plotting has not been interrupted. The user may have to select this function under two situations: The plotting by ploter has been interrupted but the hpg12 program cannot acquire the interruption position (e.g. the PC power is cut off) or the forepart of an image does not need to be plotted.
6.3. Auto Plotting by Pattern Making Software :
The method described above in the section Plotting by ploter can only make one plot each time. The hpg12 software also has the automatic plot function. Click “Tools”menu→“Auto Plot” to pop up the dialog box:
The job list of automatic plotting by ploter will appear when you select a folder. The files in the selected folder will be plotted one by one automatically. Pattern making software support free dxf files.
To bring forward a file in the job list, you have to interrupt the plotting by ploter of the current file, select the file to be brought forward and click on the “Move Forward” button to move it to the top of the job list. Click “Plot”to start.
To interrupt the automatic plotting by ploter click “Cancel”. If a plot is underway, you have to click the “Cancel” button in the plot progress window. The plotter plot automatically with the help of pattern making software
The grading engine for Gerber AccuMark 8.0 has been modified in order to support the many new enhancements that have been added to this release. Some of these enhancements are not compatible with Classic Gerber AccuMark. If data created on 8.0 are displayed or Order Processed on an earlier version of software, some items are not preserved if the data is saved in an earlier version of software, and in some cases piece geometry can change shape or notches can move is the data is saved in an earlier version of software.
We are sole agent of all Garment and Textile ERP Software companies. We can provide information about the best ERP software company based on your requirements. We are trouble shooter of fashion industrial software like Willcom, Barudan, Lectra, Gerber, iEcho, Datacolor, Shedomaster, Batch, Qc etc
A utility to check for differences between graded sizes created in 7.6.5 and graded sizes of the same piece created in Gerber AccuMark 8.0 is available to review existing data.
Data Conversion Services:
It support data conversion services. Data can be compared from any drive or (non-MSDE/SQL) storage area. Using standard wildcards in the “Pattern” field to compare specific patterns within a storage area. The “Tolerance” field is used to define a specific measurement that a point can deviate between releases. View/System Preferences can be used to set the “Tolerance “ field to Metric or Imperial.
After the initial dialog box is completed, the Check button is used to initiate the comparison. While the utility is running, the “Stop “button can be used to cancel the operation. The “Skip Piece” button can be used to skip over a specific piece if the utility gets hung up checking one piece. This can happen if a piece is corrupt and has hundreds of sizes.
Initially only pieces with problems are displayed in a list. The “Show All Pieces” button can be used to display all pieces in the storage area, which includes those pieces that are within the grading tolerance specified.
The potential status values of data conversion services are “Points out of tolerance” or “Failed to grade piece using old/new grading method”.
Gerber Data:
When a specific size is selected from the Details section of the form, the “View” button is enabled. The “View” button displays the old and new versions of the piece. More than one size can be selected to view at the same time. Generally, sizes farther away from the base size have a more pronounced difference. Several functions are available in this View window. The gerber data can be convert from gerber to dxf and dxf to gerber
Data Quality Tools Comparison:
Some data quality tools comparison are stated below-
Status Bar:
The Status Bar is best gerber data quality tools comparison that provides the function that is being applied.
View:
It is another gerber data quality tools comparison of Full Scale, Full Width and Full Height can be used to control the view. The piece can be zoomed in on using the left mouse button and creating a marquee around the desired area. The right mouse button will reverse the views.
Sizes:
The sizes menu shows a list of sizes that is being displayed. Each of these sizes can selectively be turned ON or OFF.
Tool Bar:
The Tool Bar has tools for New Grading, Old Grading, Differences, Symbols, Notches, Smoothing, Measure and Clear Measurements. Toggle the icons or use the options in the View menu to turn a function on or off.
New Grading:
The grading generated by AccuMark V8.0 is displayed as white lines and can be turned ON or OFF.
Old Grading:
The grading generated by AccuMark V7.6.5 is displayed as green lines and can be turned ON or OFF (new grading if selected, is displayed on top of the old grading).
Differences:
The areas where the old and new grading methods produce difference results are displayed as red lines and can be turned ON or OFF.
Notches:
The display of notches can be turned ON or OFF.
Smoothing:
The display of the piece with smoothing applied can be turned ON or OFF.
Measure:
Distances between points can be measured. The user is prompted to select the first and second points for measuring.
Clear Measurements:
Use this function to clear all measurements on the display.
Conclusion:
You can buy different types of data conversion services software those are available in this site. There are different types of data conversion facility exist in this software like gerber to dxf as well as dxf to gerber etc.
Garments CAD – computer aided design of Gerber, Lectra and Catia is online cad designed for Apparel Industry. We are the largest Garment and Textile ERP software collector in Bangladesh. We sale customized ERP for the factories. We are agent of all Garment and Textile ERP Software company. We will forward you to the best ERP software company based on your requirements. We are trouble shooter of fashion industrial software like Willcom, Barudan, Lectra, Gerber, iEcho, Datacolor, Shedomaster, Batch, Qc etc. For any queries, please Contact Us., Cell# 01792525354. Garments CAD – computer aided design software becomes the best tool for pattern making in garment industry. In garments industry computer aided design Software is used for making patern, marker making, pattern grading, marker making and digitizing manual patterns. A lot of garments CAD – computer aided design software suppliers who have developed the systems for pattern making andcad drawing all over the world. Widely used computer aided design systems and their software modules are listed below.
Software is distributed by Lectra and authorized agent all over the world. Some agent provide freecad training. List of Lectra products which support a lot of CAD file format . Software Evolution is a subscription which gives you access to the latest releases of Lectra’s solutions, allowing you to continually improve your technical performance and to optimize your design environment with each technological innovation. Software Evolution protects your investment over the long term. It provides substantial savings while enabling you to maintain state-of-the-art technology
Lectra
Gerber for Pattern Making:
Software is distributed by Gerber and authorized agent all over the world. Changes have been made to the Style Converter to make it easier to correct the pieces that have errors during conversion. Styles with warnings or errors can be automatically saved to a new folder during conversion. In addition, a csv file with all of the errors and warnings can be generated. List of Gerber software for pattern making as well as cad drawing:
Gerber
iECHO for Computer Aided Design:
Software is distributed by iECHO and authorized agent all over the world. List of iECHO products for pattern making as well as cad drawing. Style Design System is one module of ECHO Garment CAD System; the main users are garment designers. Style Design System includes lots of useful libraries, such as style library, fabric library, part library, decoration library you can also scan new design by scanner. Besides, there’re many kinds of painting tools and colors for designers to select and design styles. When you are operating tool, there’s prompt in the below information bar, which helps designers to understand tools better and get better effect.
Catia for Pattern Making :
Catia software is used for pattern making and other cad drawing management system. There are some freecad, free drawing program is found in online
Optitex Pattern Making :
When using PDS with 3D runway creator for PDS, you can easily drape your patterns on one of the several models included in the software of your own model
