Mechanical Safety Tester – Saf Guard Universal Mechanical Safety Tester for Button pull test. As desired, we are pleased to inform herewith our best prices for the following items for your special consideration. To appoint Safety Representative for Premises and House Keeping, Mechanical, Electrical & Personal Safe Guarding. Fire Protection and Prevention, and Incident ( accident) Recording & Investigation …
STA-0020 Imada Force Gauge FB-30K
STA-0041 Upper Universal Grip
STA-0002 Upper Stud Grip
STA-0005 Upper Grasp Button Grip
STA-0042 Lower Fabric Clamp
STA-0006 Low Grasp Button Accessories Kit
STA-0004 Calibration Weight 15LB
STA-0040 Mechanical Stand for Imada Force Gauge
STA-0007 Upper Long Nose Vise Grip
STA-0008 Upper Three Pronged Grip
STA-0037 Small Part Cylinder , Plastic
STA-0035 Goggles, – STA-0039 Rubber Ring,
STA-0084 Multifunctional vice clump
Operation Manual, Origin: Hong Kong & Japan
Terms of Offer:
Offer validity : 30 days from the date of issue.
Delivery period : Sl. No. 01 from ready stock & Sl. No. 02 after LC of our principal.
Payment : Cash/Cheque on delivery.
To communicate on safety matters to both management and the workforce to increase safety awareness. Assuring you of our best services at all times & thanking you.
More Devices
Description of the Element
Machine Guarding
Lock-out System and Usage
LABELLING of Switches, Isolators and Valves
Ladders ( Registers), Stairs, Walkways
Lifting Dears and Records
Compressed Gas Cylinders, Pressure Vessels
Hazardous Substances Control
Motorized Equipment: Checklist, Licensing
Portable Electrical Equipment
Earth Leakage Relay, Use and Check
General Electrical Installations and Flame Proofing
Hand tools: eg., Hammers and Chisels
Ergonomics
Head Protectors
Eye and Face Protection
Footwear
Protective Clothing
Respiratory Equipment
Hearing Conservation
Safety Harness
Hand Protection
Control Over Personal Protective Equipment
Notices and Signs
Machine Guarding
To ensure safety of persons using equipment/machinery.
All hazardous moving parts within normal reach are
completely guarded.
A good guard must have the following characteristics, for
easy remembering sellout the word MACHINES and read against each word as below:
M ximum positive
protection
A cess to danger
zone prevented during operation
C rrosion and
fire resistant and can easily be repaired
H zard such as
splinters and pinch points should not be created by the guard
I spection by
government official (factories Inspector) – the guard should comply.
N t weakening
structure and be permanent part of the equipment
E ficient
operation of the machine mist not be affected
S rong enough to
withstand normal wear and tear
Make a list of machine guards within the site provide and
identification number and survey the condition of each guard for its
suitability as a good guard.
The serial numbers to allocate as per standard defined as
under:
The safety representative to report any unsafe machines, no
guards, loose broken or inadequate guards, or nip points monthly in his
standard inspection report.
Condition of pedestal grinders & grind stones within his
area also to be checked along with whether the grinding wheels are used safely.
Conclusion
The objective of this section is to implement and manage a
system to effectively control those aspects which relate to the use of
machinery and electrical equipment and the provision and usage of personal protective equipment so
that injuries and losses are eliminated or minimized.
Sub Contract Work – All kinds of sun-contract activities, either with any associated factory of factory or with third party, must be finalised by Managing Director of the company. The Senior Production Co-ordinator of the company will be overall responsible to contract & execute all kinds of formalities between both the parties (contractor & contractees). Any kind of subcontracted goods /garments will not be delivered from the factory without the written approval of the Accounts Section.
The Buttons Firmness Tensile Testing Machine can do all kinds of buttons on the clothing uniform vertical tensile test, testing whether its solidity can meet the relevant safety standards. Standard: 16 CFR 1500.51-53, ASTM PS79-96 Standard configuration:
blocked access to fire extinguishers. PA (public address) system not available in each section of the factory in case of a fire (incl. sample room)
distances between fire hose pipes too short not allowing all areas of the factory to be reached with at least one
factory does not provide proper fire fighting training to sufficient number of workers by a competent person or prescribed authority
factory is lacking sufficient number of fire fighting equipment such as fire hooks, bitters, stretchers etc.
fire extinguishers are not provided in all areas (e.g. generator room, wastage room missing)
fire extinguishers are undercharged or out of order
fire extinguishers laid on floor or installed higher than 1.5m
fire fighters don’t wear identification (e.g. uniform, armband or badge)
fire hose pipes found partially blocked. smoke detectors not in all areas of the factory e.g. packing, sub-stores, accessory store, temporary yarn and fabric store, wastage store etc.
fire hose pipes not provided in all areas of the factory
hose pipes leaking
incorrect amount of CO2 (6kg), CO2 (30kg), ABC (6kg) and ABC (30kg) fire extinguishers available
insufficient number of fire fighters per production floor, need to be 25% of workforce
no training records available for fire fighter training provided
number and type of fire extinguishers not as per law or factory’s fire licence
number of fire extinguisher operators is less than required (25% of total workforce in any section separately (Bangladesh))
operating instructions are not available for all fire extinguishers, and not displayed on them or above where they are fixed
