What is 3Kva UPS ? General UPS Functionality

3Kva UPS – Read about General Guidelines for UPS

outr power capacity 2.7 KWatts / 3.0 kVA  
KW Configurable Power (watts 2.7 KWatts / 3.0 kVA  
Pvinal Output Voltage 230V  
OtraVoltage Note Configurable for 220: 230 or 240 nominal output voltage  
Output Voltage Distortion Less than 3%  
Output Frequency (sync to mains) 50/60Hz •1- 3 Hz  
Load Crest Factor 3:01  
Topology Double Conversion Online  
Waveform type Sine wave  
Output Connections (8) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Satiety Backup)
(21 IEC 320 C19 (Battery Backup)
Bypass Internal Bypass (Automatic and Manual)  
Nominal Input Voltage 230V  
Input frequency 40 – 70 Hz (auto sensing)  
Input Connections British 651363A, IEC-320 C20, Schuko CEE 7/EU1-I6P  
Input voltage range for main operations 160 – 275V  
Input voltage adjustable range for mains operation 100.275 (half load)V  
Cord Length 2.44meters  
Other input voltages 220, 240  
Number of Power Cords   3
Communications & Management  
Interface Port(s) R1-45 Serial , Smart-Slot , USB  
Control panel Multi-function LCD status and control console  
Audible Alarm Audible and visible alarms prioritized by severity  
Emergency Power Off (CPO) yes  
Surge Protection and Filtering  
Surge energy rating 340Joules  
Filtering 340Joules  
Featu es & Benefits  
Embedded network management card with environmental monitoring (5 kVA — 10 kVA models) Remote monitoring and control of the UPS and the environment via Ethernet connection while freeing up the SmartSlotTM so customers can add accessories for additional communication options.  
Display LCD Display  
Operate without battery Yes  

Sendon UPS functionality:

  1. Switch on your Sendon UPS. The ON/OFF Led should be Green. The green LED indicates that the voltage is normal. So you can operate your computer system as usual.
  2. When the red LED remains ON for a few seconds and then turn off, it means the internal control circuit has shutdown.  It is necessary to turn off the POWER switch for at least 6 seconds to reset this condition. Also check whether the UPS is overloaded or short circuited.
  3. Both the red LED and biff are on intermittently as long as the UPS is in back-up mode.
  4. When the battery charge is finished, the UPS will shutdown itself. The red LED and biff will be on for a few seconds and then turn OFF.   

Micro UPS Functionality:

There is three LED in the front of this UPS

  • AC Normal
    • Inverter
    • Charging

AC Normal: When the computer is run from AC via UPS this LED is ON

Inverter: When electricity is not available then the computer is run from battery /Inverter mode. On that time this LED is ON.

Charging: When battery will be charging this LED will be on. The benefit of micro UPS is when you leave office you must switch off your UPS. As a result instead of switch OFF of the UPS, it will be charging during your leaving time.

You can contact me to understand in detail.

More Equipment

• Automatic Voltage Stabilizer
• – Domestic and Industrial ( 1KVA to 5MVA)
• Uninterruptible Power Supply (UPS)
• ( On-Line UPS & Off Line UPS)
• – Domestic and Industrial
• Emergency Power Supply (IPS / EPS)
• Sub-Station Equipment
• – 5KVA to 5MVA
• Automatic Battery Charger
• Converter & Rectifier
• Digital Clock
• Distribution Transformer
• – 5KVA to 5MVA
• Static Inverter
• PFI Plant
• Water Level Controller (WLC)
• Electronic Fan Regulator (EFR)
• Electronic Ballast
• Electronic Moving Message Display
• Other Electronic Equipment
• Fire Hydrant System
• CC camera System
• CC camera Central monitoring System
• Building Management And Controlling System (BMC)