Bf-200 Printing on Foam Board
The product is also called puff-print paste or foamboard printing and are clarified according to different foam multiplier, BF-200 is low multiplier foam. BF-200 is low multiplier foam, could be foam with temperature of 80-120℃. It is used for screen printing environment. BF-200 is washing resistance type, specially designed for burning flower printing. Mix a little water or harder to lower down the viscosity. But please use higher viscosity to print, thus printing materials is not easy to infiltrate to cloth bottom, and have a better hand-touch(softness). If the foam multiplier is too high, add BW-S or BR-S to ajust it, add BW-S for white degree requirement, add elastic transparent paste BR-S for colour requirement. Add BW-768M or BR-768G serial for hand-printing.
After Foamboard Printing:
- Add colour paste after foamboard printing and add colour paste directly, after mixing up, add some water to adjust the viscosity if needed, as different colour paste has different viscosity.
- Could be use temperature to foam directly, but the printing surface will be rough.
- Could be use heat-presser to foam with temperature of 125℃ for 5 second, in this way, the printing surface will be better smooth.
- The above information is based on our own company’s test result, please have a test with small quantity before manufaturing with big quantity.
- According to international consuetude of chemical product , we are not obligated to any guarantee about foamboard printing.
JIANGMEN SINOBLE PIGMENT CO., LTD.
ADD: Douwei Chongnan, Meige, Shadui, Xinhui, Jiangmen, Guangdong, China
T E L ： +86-750-3618958
F A X ： +86-750-3618967
E-Mail ： jmhhyl@126.com
W E B ： hhchemical
Trackbacks/Pingbacks