Abrasion Resistance Testing Machine
Application Martindale Abrasion :
The instrument is suitable for: GB / T4802.2, ASTM D4970, ISO12945-2 textile pilling test. Also applies to GB / T13775, ASTM D4966, ISO12947 textile wear resistance test. Read about Martindale Abrasion Resistance Testing Machine sss
Specification:
- Number of stations :4 digits
- Estimated count : 0 ~ 999999 times
- Accumulated count : 0 ~ 999999 times
- Maximum movement : 24 ± 0.5mm, 60.5 ± 0.5mm
- Compressive mass :Clamp: 200 ± 1g
- Clothing material weight hammer : 395 ± 2g
- Furniture decorations Sample weight : 594 ± 2g
- Stainless steel butterfly : 260 ± 1g
- Clutch and grinding table relative movement speed : 50-2r / min
- Load hammer quality : 2385 ± 10g
- Dimensions : 885 × 600 × 410mm (L × W × H)
- Power supply : AC220
- Pls see the attachment,which is the more detail of this machine.
- If you have any other quetion,pls let me know.
Work Plan for IE:
- EOT Control.
- Give compensation for special achievement
- Implementation of 5S.
- Special team work for difficult style.
- Target establishment.
- Execute Manager & supervisor training Program.(continuously)
- Lean setup.
- Factory Efficiency level (52+2) % sustaining.
- Wastage reduction
- Established Line Lay out as per Operation bulletin.
- Visual management implementation
- Do creative work & right method apply
- Proper line balancing
- Cost reduction of Abrasion Resistance Testing Machine
- Every line will be converting into model line.
- Hourly production monitoring
- Relation buildup with top management
- Memorable work
- Proper utilization of man & Machine
- Modifying the operator recruitment policy.
- Respect for the Individual duties & responsibilities
- Abrasion Resistance Testing Machine Respect for the punctuality.
- Unnecessary motion reduction (if possible eliminate).
- Sewing defect & rejects reduction.
- SMV Based Target set up for finishing section.
- Martindale Abrasion Execute Finishing Recruitment & Assessment policy.
Trackbacks/Pingbacks