What is Perspirometer?
Perspirometer is used to determine color fastness of textiles to water and sea water and perspiration.
Specification of Perspirometer
- Machine name: Perspirometer.
- Model number: 890
- Machine origin: England
- Brand name: James H. Heal and Co. Ltd
SOP for QC SUB CONTRACT
PURPOSE: To maintain the minimum quality parameters in case of sub contract knitting, dyeing and finishing for Auto Textiles Ltd.
SCOPE: Sub contract factories and QC dept in Auto Textiles Ltd.
RESPOSIBILITY: Sr. supervisor, supervisor, Lab-in-charge, Sr. Manager, QC.
PROCEDURE: For sub contract Knitting, Dyeing, Finishing & Yarn Dyed separate orders are prepared including necessary requirements as per our buyers’ requirements and placed to the sub contracts factories and we keep the records after receiving the sub contractors.
Note: Here no specific format is used for sub contract work order as the necessary parameters are varying every time.
INSPECTION: In case of sub contract knitted greige fabric is inspected as per 4-point system and it is recorded in Greige Inspection Report (F/QC/04).
Formula = B X 100 = Points/ 100 Sq Yds
A
Here, B = Total points found, A = Total SquareYds
A
Frequency:
Greige fabric is inspected based on sampling
Formula: √a +1 (ref: Martindle)
Here, a =Total No of roll
Acceptance: In greige inspection we accept up to 40 points per 100 sq yards (however this should not be exceeded 28 points per 100 sq yards in case of finished fabric). If it is more than 40 (ie. up to 60 is B grade, up to 80 is C grade and more than 80 is considered as rejected) in greige stage, QC people will make the NCMPR (F/QC/03) for final decision accordingly.
Dyeing & Finishing (Both Solid & Yarn Dyed Finished Fabric)
In case of sub contract Dyed & Finished fabric it is inspected as per 4-point system and it is recorded in Finished Fabric Inspection Report
Here actual roll length in yds and actual width in inch.
Frequency:
Finished fabric is inspected based on sampling
Formula: √a +1 (ref: Martindle)
Here, a =Total No of roll.
Acceptance: As per procedure using the Finished Fabric Inspection Report form if it is below 28 points per 100 sq yards then it is accepted and if it is more than 28 then QC people will prepare Non-Conforming Material/Product Report (F/QC/03) for final decision of review board whether it is useable or not for the same or by any subsequent procedure like re-process or some thing else.
Yearly Preventive Maintenance Schedule Perspirometer
Weekly 1.Check drive motors and its terminals.
2.Check heating Element and its operation.
3.Check water inlet solenoids valve and clean it if required.
4.Check main drive motor and its speed if required adjust the speed from power board.
Two Month: 1. Check drain valve and clean if required.
2. Calibrate all parameters if required.
3. Check motors and belts, adjust tension if required.
Yearly: 1. Check Micro switch operating strip adjustment and
More Test Equipment Name
- Labdip Dyeing M/C (AHIBA NUANCE)
- Labdip Dyeing M/C (AHIBA NUANCE)
- Labdip Dyeing M/C (Rapid)
- Digital Pipette (I)
- Digital Pipette (II)
- Digital Balance
- Electrolux Wascator
- Perspirometer
- Yarn Appearance Tester
- Manual Twist tester
- Manual Wrap Reel
- Thermo hygrometer
- Paramount Pick Glass & Scale
- S.M Cutter
- Grey Scale Perspirometer
Trackbacks/Pingbacks