Electromagnetic Vibration Table
- Size(LWH): 353510 CM for Electromagnetic Vibration Table
- Monitor: LCD display
- Material: Aluminum rust
- Test load: 50KG
5.Voltage: 220V 2KW - Amplitude: 0-5mm
- Vibration direction: vertical
- Vibration wave string: sine wave
- Time control: 1-999H, M.
- Vibration frequency: 50HZ fixed frequency
Manual rolling wheel
Model: LX-8861
2 speed: manual
- Pressure load: 2000 ± 50g
4.wheel width: 45mm - Wheel diameter: diameter 83mm
- Rubber thickness: 6mm
- Rubber hardness: HS80 ± 5
Workers Safety Issue
- areas not found in approved building plan e.g. dining area
- Building Stability Certificate missing
- cartons/items kept above 6 feet high, e.g. in fabric and finished goods store. Factory should indicate height limit in relevant areas to avoid going above.
- contaminated products (based on metal detection check) not kept in a segregated area away from production and procedure not in place for their safe disposal
- DB , electric supply channel board and electric switchboards are made of wood, should rather be steel or anything similar that is non-flammable
- diesel barrels not stored separately and not protected to avoid accidents
- electric wires used without plug
- electrical control panels blocked e.g. in dining area
- electrical installations not checked periodically in a scheduled and recorded manner
- elevator operator’s permit not up-to-date and not available at the factory for inspection
- health & safety training is not recorded
- last upper stair found much higher than other stairs i.e. double, needs to be even
- no danger sign posted on electrical panel boards
- no safety cover installed for some switches
- no workers participation and welfare fund to share benefit
- noise risk assessment not undertaken to avoid e.g. excessive noise of generator near production area
- pin used to mark button position
- razor blade found in winding section
- sharp tool policy not in place and not effective, incl. records for the use of tag guns and their needles. Any sharp tools should be counted in and out on a daily basis (incl. tweezers).
- workers insurance policies not kept up to date