Inkjet fabric printing
| Inkjet fabric printing Features | Specs |
| Number of installed printing heads: | 4 |
| Number of installable printing heads: | 4 |
| Printing width: | 1500mm-2000 mm |
| Dryer | Electric |
| Inks to be printed | Reactive, Acid, Pigments, Disperse |
| Substrates (fibers) | SilkViscousLinenCottonWoolLyocellNylon Woven, Knitted, Nonwoven, Towel |
| Substrate Structures | |
| Drop Size Resolution (dpi) | 4-72 pl 600×600 |
| Ink flow | Pneumatic controlled Digital Inkjet Fabric Printing Machine |
| PLC based, Servo motor controlled, blanket based |
checklist QC fill in << final Inspection Record>> for below check (see Appendix . Record keeps in. Read more about Digital Inkjet Fabric Printing Machine
QC Department
- check material texture ( tool: calipers, standard:approved sample
- check material thickness (tool: calipers, standard:approved sample)
- check printing content : text, graph,lines and dots (tool: visual,standard: approved sample
- check color (tool: X -rite,standard :approved sample, acceptance standard : pass if Δ E< 1) Length < 15cm > 15cm Width <10cm >10cm pass Toleranc ± 0.5 mm ± 1 mm
- check if shortage in package quantity (acceptance standard: fail if shortage,sample siz: MIL-STD-105E)
- barcod (tool: barcode scanner, acceptance standard: all are readable
- ink residues.paper wool, stained spot , ink permeate on back side , adhesive mark, scratches,drag marks, bubbles glue mark, stanted UV mark, UV damaged or other undesirabl phenomena (acceptance standard: fail if anyone found)
- check ink dot or dirt ( acceptance standard: pass if any I dot is < 1mm2 or 3 dot in 0.5 mm sample size:100% inspect)
- check burring on the edge, indentation,incomplete die cut,die cut counter,die cut wrongly,blasting on the
- border areas, burst holes,color burst (acceptance standard: fail if anyone found)
- check if all processes are completed with production order
- check if size based on production order
- check if label outside the carton match with actual goods inside based on folder information
- check any damage carton box and damage inner packing(acceptance standard: MIL-STD-105E)
- if fail ,QC fill in << Rework/ Scrap Report>> Report keeps in QC Department
- if shortage due to high wastage, fill in << Quality Problem Report>> with defected sample and pass to QC supervisor. Report keeps in QC Department
confirm out by barcode scanning
Trackbacks/Pingbacks