Home / Trims / List of Machine Accessories and Trims

List of Machine Accessories and Trims

List of Machine Accessories and Trims

 

What is Lace Trim? List of Fabric Trimmings.

What is Garments Accessories? List of Garments Accessories.

Tensile Strength of Bra Hooks Bra Rings and Sliders

What is Button Pull Test. Buttonhole Requirements

What is Garment Trims Requirement and Procedure?

The Requirements of Childrenswear Accessories for Buyer

What is Safe Chemical Handling Procedure and Policy?

Nominated Supplier Approval Process for Trims Factory

List of Accessories and Trims Defects

Main label: weaving, cutting, spot, folding, printing, measurement, mistake problem.

Size label: weaving, cutting, spot, folding, printing, measurement, mistake problem.

Care label: weaving, cutting, spot, folding, printing, measurement, mistake problem.

Button: broken, shinning, spot, logo missing, hole missing, thickness, dice, logo printing, measurement, shade problem.

Hang tag: spot, printing, cutting, and mistake problem.

Poly sticker: spot, printing, cutting, mistake problem.

Carton sticker: spot, printing, cutting, mistake problem.

Size sticker: spot, printing, cutting, mistake problem.

Thread: shade, counting problem.

Cuff link: broken, shade problem.

Tussue paper: measurement, cutting, thickness, spot problem.

Gum tape: measurement, gum problems.

Zipper: measurement, sharpness problem.

Barcode label: scanning test, spot, printing problem.

Barcode sticker: spot, printing, cutting, mistake problem.

Badge label: un cut thread, cutting, weaving, broken stitch, measurement problem.

Twill tape: weaving, cutting, spot, shade, measurement problem.

Sizer: spot, broken, printing, size mistake problem.

Hanger: broken, dise sharpness, measurement problem.

Poly bag: spot, cutting, air hole missing, thickness, printing mistake, measurement, size mistake poblem.

Metal clip: rust, magnet free, nickel, ferrous, broken, spot, dice, thickness, measurement problem.

Metal pin: rust, magnet free, nickel, ferrous, broken, spot, dice, thickness, measurement problem.

Denision loop: spot, cutting, sharpness, measurement problem.

Cable tie: spot, cutting, sharpness, measurement problem.

Butterfly: spot, cutting, sharpness, measurement problem.

Collar bone: spot, cutting, sharpness, measurement problem.

Collar insert: spot, cutting, sharpness, measurement problem.

Tie: measurement, spot, weaving, shade problem.

Neck board: spot, cutting, thickness, measurement problem.

Back board: spot, cutting, sharpness, measurement problem.

Carton: measurement, spot, printing, cutting, fly quality & quantity, shipping mark problems.

Main label: brand mistake, colour mistake, size mistake, cm numbering missing, since numbering.

Size label: size mistake, color mistake, unreadable size, country name missing.

Care label: size mistake, composition mistake, color mistake, symbol wrong, and address missing, country missing.

Button: hole missing, logo wrong, logo missing, dice problem, measurement problem, and shade problem.

Hang tag: size mistake, brand mistake, style mistake, symbol mistake, price mistake, and barcode number missing.

Poly sticker: size mistake, country name missing, price mistake, wrong barcoed, barcode missing.

Carton sticker: size mistake, country name missing, wrong address, paper colour wrong.

Size sticker: size mistake, country name missing, price mistake, wrong colour.

Barcode sticker: size mistake, country missing, price mistake, barcode missing.

Badge label: brocken stitch, measurement, colour mistake.

Twill tape: colour mistake, measurement problem.

Sizer: size mistake, wrong printing, colour mistake.

Hanger: dies sharpness, measurement, broken problem.

Poly bag: size mistake, air hole missing, wrong printing, rn number missing, children warning information missing.

Metal clip: rust, magnet free, nickel, ferrous, brocken, spot, dice, thickness, measurement problem.

Metal pin: rust, magnet free, nickel, ferrous, brocken, spot, dice, thickness, head sharp, measurement problem.

Thread: shade problem, count problem.

Neck board: thickness, measurement problem.

Back board: thickness, measurement problem.

Carton: measure, spot, printing, fly quality & quantity, shipping mark problem.

Denision loop: spot, cutting, sharpness, measurement problem.

Cable tie: spot, cutting, sharpness, measurement problem.

Butterfly: spot, cutting, measurement, printing problem.

Collar bone: spot, cutting, measurement, printing problem.

Collar insert: spot, cutting, measurement, printing problem.

Tie: measurement, spot, weaving, shade problem.

Neck board: spot, cutting, thickness, measurement pproblem.

Back board: spot, cutting, thickness, measurement pproblem.

Carton: measurement, spot, printing, cutting, flies quality & quantity, shipping mark problem etc.

Excess Fabric and Accessories

Considering the importance and suggestions of the merchandisers’ management has come to a decision regarding excess fabric and accessories issue.

  • Regarding excess fabric issue suggestion from the merchandiser was, after every order execution store will report about the left over fabric status to the concerned merchandiser along with the authority. But management feels as merchandisers are already overloaded with work, they should not collect the information from the store. Rather they themselves will maintain the report after each order execution. It will be easier for them to do so as they have all the information from order placing to order execution.
  • If merchandisers find some left over fabric after the order execution, maximum two months they can keep the fabric with them with written confirmation to store for reusing. After these period store will go for normal procedure.
  • For changing style of any order if any excess fabric is issued from the buyers’ side, it also should be informed to store.
  • For the sample order the current system of keeping 11 yards of fabric (uncommon fabric) will be same.
  • Regarding second garments it is decided that store would not keep them. They would be sending for sale. But before sanding for sale it must be ensured that all main logo / levels should be removed from the garment.
  • Regarding cone, interlining etc. it is decided to follow same procedure as fabrics.
  • For maintaining the cones of thread properly, one more person is required in store
  • For an order of 1400 yards of interlining was demanded whereas the store already had 4100 yards of interlining
  • Accessories (hanger, clear gum etc.) which could be reused any time should be stored properly to minimize the cost.
  • Finally, we all should be careful to avoid extra cost for the betterment of the company.

Some accessories name

  • Fabric
  • Button (chalk)
  • Stone button
  • Carton
  • Sewing thread
  • Care label 100% cotton
  • Main label
  • Size label
  • Main label
  • Care label
  • Size label
  • Care label 97%, 3%
  • Size label
Mr. Enayet, CTO, Rock Accessories Ltd, Chittagoang

About Engr. Kh. Mashiur Rahman

He is Garment Automation Technologist and Editor in Chief of Autogarment. He is certified Echotech Garment CAD Professional-China, Aptech-India, NCC-UK and B.Sc. in CIS- London Metropolitan University, M.Sc. in ICT-UITS. He is working as a Successful Digital Marketer and Search Engine Specialist in RMG sector during 2005 to till now. Contact him- apparelsoftware@gmail.com

Similar Post

Nominated Supplier Approval Process for Trims Factory

Nominated Supplier Approval Process for Trims Factory

Nominated Supplier Approval Process The nominated supplier list as it stands is enclosed. It will …

Leave a Reply

Your email address will not be published. Required fields are marked *