Electrical Tools Set for Maintenance Department

Electrical Tools Set for Maintenance Department

Electrician Tool Set

The ensure provision and maintenance of Electrical Tools Set in safe condition of correct tools and furniture for respective application to enhance quality of workmanship and reduce risk of injury.

  • Air Filter (APS) Pneumatic
  • Belt -1950x8x28mm (Diesel Generator)
  • Electrical Tools irclip Lock -14
  • Circlip Lock -16
  • Circlip Lock -18
  • Circlip Lock -20
  • Holder of the Tools:
  • Department / Section:
  • Chisels
  • Heads safe-ended or dressed
  • Cutting edges sharp and square
  • Files
  • Tangs protected with handles
  • Teeth Sharp and clean
  • Hammers
  • Handle smooth and clean
  • Face of head smooth not mushroomed
  • Screwdrivers
  • Handle smooth and clean
  • Bits sharp and square
  • Wrenches
  • Jaws sharp not spread
  • Right type for the job
  • Any other Tools ( write name below )
  • Circlip Lock -22
  • Chain Lock 25 Half
  • Chain Lock 25 Full
  • Cutting Disk 4″x1.2mm
  • Welding Road 10 No Vortic Marin
  • Drill Bit 3mm
  • Drill Bit 3.2 mm
  • Drill Bit 4mm
  • Torch Light 12″
  • Thermocouple -2 meter (APS)
  • Cooling Fan 5″
  • Volume 502 K ohm
  • Capacitor 4 UF
  • Capacitor 3.5 UF
  • Proximity sensor round NPN, 18mm(PR 18-5 DN)
  • Cable Lux -6 Rm (APS)
  • 13A 03Pin Three Pin Plug
  • Kona Switch
  • Proximity NPN NO (Squire)
  • PIB tape (original)
  • Solid State relay 40 DA- H 40 A INPUT 3-32V DC
  • Halogen Light 400watt china
  • Halogen balast 400watt
  • Philips 100w
  • Philips 60w
  • Drill Bit 5mm
  • Drill Bit 7mm
  • Drill Bit 8.5mm
  • Drill Bit 10.2 mm
  • Drill Bit 10.5mm
  • Drill Bit 12 mm
  • Drill bit 13mm
  • Electrical Tools Drill Top 2”’
  • Drill Top 2.5”’
  • Drill Top 3”’
  • Drill Top 4mm-
  • Drill Top 5mm
  • Drill Top 6mm
  • Drill Top 8mm
  • Drill Top 10 mm
  • Drill Top 12 mm
  • WD-40
  • Gauge Glass Boiler 50x8mm
  • MS Elbow 2″ W/T
  • Non Return Valve 50mm (Boiler)
  • Puller 8″
  • Sly range 8″
  • Jewelry File
  • Cutting Player 8″
  • Nose Player 8″
  • Chain/Chisel 10”
  • Sly range 6″
  • Allen Key set (one side round)
  • Allen Key 5mm
  • Hammer 1/2 Lbs
  • Oil Can
  • Flute Gauge (for Deep measurement)
  • Pneumatic grinding tools
  • Hardness Test Kit
  • Socket 8mm (12Pole)
  • Socket 12mm (12Pole)
  • Socket 16mm (12Pole)
  • Socket 17mm (12Pole)
  • Socket 22mm (12Pole)
  • Socket 24mm (12Pole)
  • Socket 8mm (06Pole)
  • Socket 9mm (6Pole)

Specialty at a glance of our product: 

  • Original Products
  • Best Print quality
  • Absolute and pure Black print
  • Tracing print guaranteed
  • Compact air bubble bag
  • Office delivery as per your demand

Electrical Tools , Garden tools and Furniture

  • Proper handtools to be provided
  • Handtools provided to be listed
  • All tools to be kept clean
  • Handtools Gardentools to be checked for proper conditions at regular intervals
  • Bad tools to be rejected and promptly replaced.
  • Makeshift or home made tools not approved by the company should not be allowed.
  • All tools to be kept in their assigned places, cupboards boxes or racks to be provided.
  • Furniture provided to be suitable and strong enough for the job and well maintained.
  • Broken furniture to be promptly repaired or replaced.
  • Handtools to be checked if in proper condition during entry
  • Handtools brought in to be listed.
  • Bad tools/ Makeshift home made tools should not be allowed.
  • All tools to be kept nicely in bags or boxes / cup boards if left overnight.
  • Files should not be without handle.
  • Chisels must not have mushroomed head.
  • Hammer handle must be fixed properly and should not be broken.
  • Screwdriver point to be sharp and square.
  • Wrenches jaw to be sharp not spread.

Terms and Conditions:

Delivery:The delivery of the goods will be made from ready stock after receiving the Work Order.

Payment:Payment to be made upon delivery of the goods.

VAT & Taxes:Price is exclusive VAT & TAX.

Validity: This quotation is valid up to “10 days” from the offer date

Qutation for Electrical Tools

Description Brand/Origin Quantity Price Sub Total
Torch Light 12″ Japan 01PS 1350.00 1350.0
Thermocouple -2 meter (APS) APS 08 125.0 1000.00
Cooling Fan 5″ Germany/China 06 PS 1150/295 1770.00
Volume 502 K ohm India 03 PS 175.00 525.00
Capacitor 4 UF Korea 12 PS 120.00 1440.0
Capacitor 3.5 UF Thailand 12PS 65.00 780.00
Proximity sensor round NPN, 18mm(PR 18-5 DN) Autonics, Korea 02PS 1750.00 3500.00
Cable Lux -6 Rm (APS)   100 PS 05.00 500.00
13A 03Pin Three Pin Plug Tengban/China 18PS 55 990.00
Kona Switch India 06PS 185.00 1110.0
Proximity NPN NO (Squire) Autonics, Korea 02PS 1350.00 2700.00
PIB tape (original) UK/China 01PS 320/120 320
Solid State relay 40 DA- H 40 A  INPUT 3-32V DC Korea 02PS 650.00 1300.00
Helogen Light 400W China 04 PS 1200 4800.00
Helogen Balast 400W Belgium 04 PS 1650 6600.00
Clear Bulb 100w Philips Philips 01 dozen 352 352
Clear Bulb 60w Philips Philips 01 dozen 340 340
Total 29377.00
Total taka in word: Twenty nine thousand three hundred seventy seven Only.  
What is Fall Protection ?

What is Fall Protection ?

What is Fall Protection

What is Fall Protection – Every year many construction workers are killed or seriously injured as a result of falls from height, most of these accidents are preventable. You can read HP Canon Printer Fuser Roller  sss

What Is Fall Protection:

It involved every plan and equipment put in place to prevent people working at height from falling, it is important that before you make up your mind to go on height to work that all necessary protection are in place for your protection, viz sss

  • Guard rails system
  •  Personal Fall arrest system
  • Safety nets etc
  • Warning Line system
  • Floor covering or barricade system
  • All these primary fall protection system must be constructed in such a way that it should be able to withstand the total weight that will be put on it in the event of emergency.
  • All personnel working at height must wear and use correctly a safety harness with double lanyard for 100% fall protection.
  • Tips on the use of double lanyard
  • Do not hook the two lanyard at the same time
  • Hook only one lanyard at a time, it is enough to hold you
  • Use the remaining lanyard to hook before removing the first one in case you want to change your location and there is obstruction that will not allow the first lanyard to travel with you
  • Do not tie knot on the lanyard, as this will reduce the strength of the lanyard.
  • Always hook up above your head to reduce the free fall distance
  • Always inspect harness before each use
  • End of What is Fall Protection
What is Fire Pit Tools  & Protection System

What is Fire Pit Tools & Protection System

Fire Pit Tools

Audit Finding/Suggestion

Electrical Fire Pit Tools Wiring must remove from the fabric store & Finished goods area. Read about Fire Drill Procedure In the Workplace. 

Emergency Exit light was missing in the child care room.
10% Workers don’t know about fire drill procedure.
Fire Equipment check list was missing at Cutting Section.
Fire extinguisher blocked
Fire fighter not aware regarding fire training
Fire Resistance door not installed.
Not provide fire training to the 25% of workers.
Centralizes smoke detector not found

Supplier’s/Production Unit’s Corrections

Management already take decision to remove all electrical wiring from the fabric store & finished goods area
Management will installed emergency exit light in the child care room.
Management providing fire drill & Fire Awareness Regarding fire safety
Management will provide check list in that area & allocated person will monitoring in regular.
Management should proper follow up regarding this issue.
Management should provide proper fire training to fire fighter.
Management should install Fire Resistance door soon.
Management should provide proper fire training.
Management should install Centralizes smoke detector soon.

MS Seamless Pipe 1” ( 25mm)
MS Seamless Pipe 1.5” ( 40mm)
MS Seamless Pipe 2” ( 50mm)
MS Seamless Pipe 4” ( 100mm)
MS Seamless Pipe 5” ( 125mm)
MS Seamless Pipe 6” ( 150mm)
MS Seamless Pipe 8” ( 200mm)
MS Weleded Tee 4”×4”×2”
MS Weleded Elbow 4”
MS Weleded Elbow 5”
MS Weleded Ruducer 4”×2”
SS Ball Valve 1/2”( Heavy )
SS Ball Valve 3/4”( Heavy )
SS Ball Valve 1.5”( Heavy )
SS Ball Valve 2”( Heavy )
Foot valve with stayner 5”
MS Gate valve flange type 2” (with flaeng)
MS Gate valve flange type 4” (with flaeng)
MS Gate valve flange type 6” (with flaeng)
MS Stayner valve flange type 5” (with flange)
Expaintion joint flange type 4” (with flange)
Grand Force Feet Pump
5.5 KW 12 bar (2″×2″)
Motor With Pump centmitagal
2900RPM 45KW=12kg Size:5″×4″

 Conventional  Fire alarm control panel (16 zone)
 Optical  Smoke detector
 Optical heat detector
 Manual call point/(break glass)
 Alarm Sirens/Bells (External/Internal Siren 15W)
 Visual Alarm
 Power cable lying
 PVC Covering
 Installation, Testing & Commissioning for the Fire Detection System
Fire pump motor 
Jockey Pump 
Gate Valve

 

100 mm dia

65 mm dia

 
Non Return Valve

 

100 mm dia

65 mm dia

 
Flexible pipe joint

 

100 mm dia

65 mm dia

 
Ball Valve

 

37 mm dia

25 mm dia

 
Foot Valve

 

100 mm dia

65 mm dia

 
Y – Strainer

 

100 mm dia

65 mm dia

 
Hose cabinet total setup consist of

 

Cabinet box, Hose pipe, Nozzle Coflin –

 
Fire brigade connection 
Pressure Switch with syfoon

 

100 mm dia

65 mm dia

 
Pressure gauge (Metering device and controls) 
Welding Rod 
Pain color 
Tarpin 
Hang Clum or settle 
Fittings 
Fire resistance door (with door closer and panic bar) 
Optical  Smoke detector 
Optical heat detector 
Power cable lying 
PVC Covering 
 Gate Valve

 

100 mm Fire Pit Tools

50 mm

 Non Return Valve

 

50 mm dia

 Flexible pipe joint

 

75 mm dia

50 mm dia

 Ball Valve

 

37 mm dia

25 mm dia

 Foot Valve

 

50 mm dia

 Y stainer

 

50 mm dia

 Pressure Switch
 Pressure gauge (Metering device and controls)
 FittingsFire Pit Tools