What is Process Wise In Side Thread Trimming System
Thread Trimming After top side checking must do the pocket cleaning due to after wash sand and dust will be in side pocket. This Process must do before starting in side trimming. Read about Best Embroidery Management Software
- After receiving garment from production account line Manager / Supervisor will be responsible for train and explain trimming helper how to thread trim with more efficient manner. This thread trimming will do part wise with separate work force. input supervisor will be responsible to records hourly production as well as daily production with register and update line manager accordingly
- Quality In charge will be responsible for advice to QI how to check the garment before start the checking process.
- Also QI Shall mark the defects found during the process inspection and inform to Quality Auditor forget necessary action to improve quality.
- Quality Auditor will be responsible to share with all quality points with QAM for improve further quality in bulk production.
- Quality In charge will be prepared written quality specification and share with all QI for their guide line’s.
- Quality Auditor will be responsible to share with all quality points with QAM for improve further quality in bulk production
- After receiving garment from production account line Manager / Supervisor will be responsible for train and explain trimming helper how to thread trim with more efficient manner. This thread trimming will do part wise with separate work force.
- Input supervisor will be responsible to records hourly production as well as daily production with register and update line manager accordingly.
- Thread Trimming and print approvals must sending merchandiser b/4 start EMB or Printing .base on merchandiser approved factory QAM given approved standard for cutting QA Auditor.
- Base on EMB and print approvals plant need to do sample and get the bulk approved from the merchandiser .responsible for EMB and printing approvals given by only merchandiser.
- After receiving EMB factory 100 % must pass through metal detector machine and keep record properly.
- Embroider and print before start the checking must have with hand QAM approved standard.
- Cutting QA Auditor responsible to given instruction to QI how to checked the EMB & Print as per QAM supervision.
- If found any defect EMB or Print need to re cut same roll and send to EMB or print
- Cutting O,A Auditor and cutting supervisor must maintain record register for finding defect .and discuss with QAM and cutting manager.
- Must have the supplier test report before starting the fusing production and it should be up by cutting auditor.
- Need to adjust the fusing machines according to the supplier test report and must follow up and checked by AQM and cutting manager for approvals for the production.
- Fusing machine supervisor must check 2 times per day pressure/timing/and temperature and it should be recorded and update Cutting in charge / AQM for any query.
- Must need to have hourly and day production record with resisted for clear identification .if any issue cutting O.A Auditor and fusing supervisor must follow up and Cutting in charge will be responsible.
Thread Trimming -Fusing Supervisor will be responsible to take hourly production and updates production in fusing hourly production report.