Finishing Department SOP
Read about Apparel ERP Software for Garment Finishing Section
- Finishing Department- Wash Good Inspection
- Monthly Shipment Planning
- Finishing Forecast Report
- Day wise monthly production Report
- Quality Inspection Finishing
- Snap Attachment Visual Check
- Snap Attachment Strength Test
- Button Attachment Strength Test
- Lock Stitch button attachment Test
- Tension for Bobbin thread report
- Button / Accessories Test Report
- Zipper check Report
- Style confirmation Report
- Rejection Body Inspection
- Production First Bulk Report After 100 Pcs
- Production Continue Bulk Report Every 3000 Pcs
- Factory Major Issue’s & Corrective / Preventive Action
- Snap Attachment Strength Test
- Nickel Test Report
- Follow up Corrective Action and Remedial Action
- AQL Chart
- Visual Checking Training
- How Checked Measurement
- Root Cause & Resolution
- Day wise monthly production Report
- Quality Inspection Finishing
- Hourly spot remove report
- Hourly spot remove report
- Top side final Audit
- Daily DHU and Repair-rejection
- Daily End line DHU graph
- Hourly visual Audit Report-Finishing
- End Line Inspection Summary Sheet
- Monthly Line Defect Summary Report
- Daily Finishing Department Rejection Report
- Store Requisition ( SR )
- Style wise hourly production Report
- Material Return Challan
- Finishing Department Reconciliation Report
- Measurement Check Report
- Full process measurement sheet
- Quality Inspection – 100% Finishing
- Repair Record at Finishing Department End Line
- Needle Detection Records
- Machine Pinch Setting Process Control Chart
- Moisture Checked Report
- Tearing Test Report
- Weekly Quality Goal
The plastic bag that the shirt goes into has a printed warning “This bag is not a toy”. When the shirt is placed in the bag this writing should go on the opposite side to the side where the swinger is placed so that the writing does not obstruct the swinger and/or kimbal. On the opposite side to the knot, put the swinger underneath the scrap fabric. Insert the swinger so that the scrap fabric is well away from the barcode, this is usually about half way down the swinger. The scrap fabric must not cover the barcode. Ensure the swinger is well secured underneath the scrap fabric and cannot move in transit.
When submitting samples to the customer place the spec sheet on the same side as the writing and not on the same side as the swinger so that the spec sheet cannot cover the swinger and/or kimbal. Lay the shirt front down and bring sleeves across the back. The sleeves are usually quite straight and not angled down the shirt body. The fold is just to the side of the armhole of Finishing Department
Trackbacks/Pingbacks