REVISED ORDER
Revised Order CONC : SUMMER S13 / ORDER CONFIRMATION
Designation : MEN’S LONG SLEEVES SHIRTS
Details : Collar Shape : BUTTONED UNDER COLLAR
- Length / Long 8 cm
- Without Stays
- Collar overstitch : 5 mm
- Collar band : 3 cm in Front
- 3,5 cm in Back
- Pocket : Sharp
- 2 Pleats at the back side = City measurement
- French seam : 1 cm
- No Front Placket
- Cuff Sharp 8 cm
- Bottom : round
- 1st button hole under collar band : 4.5
- Last button hole : horizontal
- Measurement chart : CITY
- Total Buttons : 7
Buttons : Colour + Size and Shape See attached
Composition : 65% POLYESTER + 35 % COTTON with cotton handfeel
Accessories : Price tickets + Main Label + Size Label + Barcode Label + Label ‘Repassage Facile’
FILE ACCESSORIES SUMMURY WILL BE SEND LATER
Folding : With PINS
Folding Cuff :Must Appears
Price : 2.70 USD FOB CHITTAGONG BANGLADESH / BY SEA
BE CAREFULL !! STANDARD CARTONS –ASSORTMENT SIZE (211 CARTONS ONLY)
We provide CRM Contact Management System and CRM Integration Free
| Our reference | Colour | Qty | II | III | IV | V | VI | Our Order | Departure on |
| 1604 3069 289 | WHITE 133 X 72 45 X45 With cotton handfeel POP TC CS | 1688 | 1 | 2 | 2 | 2 | 1 | 32773 | 05/12/05 Vessel Departure BY SEA |
TO RECEIVE FOR APPROVAL :
– Fabric labdips
– Production fabric 10 cm x 10 cm
– Care label
– Button
– 1 counter sample to submit before 15 TH OCTOBER 05
Waiting for your confirmation and your proforma invoice. Best regards, Alexandra for Delphine CHANDESRIS.
AFTER TREATMENT (WASHED PRODUCT)/WRINKLE FREE
Examine the garment and place a check mark under YES, NO or N/A-
| Check if hand feel is correct to approved washed standard with regards to surface appearance, softness etc. |
| Check for color and cast of garment against approved standard to ensure that they are very close or within the approved shade band between light and dark. In the case of indigo denims or piece dyed fabric or over dyed garments, arrange a few garments flat on table over lapping each other and place the shade bands (dark and light) on either side of the garments to verify correctness of shade. Repeat this check for every half dozen garments from the sample lot. |
| In the case of heavier washed product, check for appearance such as abrasion and any destruction to see if they are up to original approved standard. |
| For garments with wrinkle free treatment, check for seam smoothness against approved standard and/or AATCC standard replicas for seam smoothness Test Method 88B. |
| Also for wrinkle free garments check for fabric smoothness against approved standard and/or AATCC standard for fabric appearance test method 124. |
| If there is crease on leg panels for wrinkle free programs, check for sharpness of crease (also known as retention of creases) against approved standard and/or AATCC standard replicas for retention of creases Test Method 88C. |
Trackbacks/Pingbacks