What is Part Wise Top Side Checking for Apparel Industry
Must have approved sample and trim card before start the meeting. Quality In charge will be responsible for advice to QI how to check the garment before start the checking process. Read about A Web Base Textile ERP and Garment Software Solution sss ….
Also QI Shall mark the defects found during the process inspection and inform to Quality Auditor for get necessary action to improve quality,Also Quality auditor will be responsible to do random audit and make the report for improve line quality level, this report will be available at line end for easy access.
Quality In charge will be prepared written quality specification and share with all QI for their guide lines, Quality auditor will be responsible to share with all quality points with QAM for improve further quality in bulk production
Button and trims attach.
This process will doing after wash as per buyer requirement .AQAM and finishing manager will be responsible and must approved sample before start the bulk.Must checked with approved sample and trim card before taken button and trims from the stores.
AQAM must set the machine for button attach as per buyer requirement and checked garment pull test and keep record for reference.if there is any kind of Label/belt/or some other trims AQAM must follow the approved sample, trim card, also he will be responsible for placement and measurement highlight to Finishing manager/Line Manager.
Also Finishing in charge will be responsible for follow up all trims is correct or not. Forget a confirmation he must follow the sample and trim card hang in front of the line.
After finish Button and any trims attach, finishing QI will check separate 100% inspection to confirm all accessories is attached ok.
Trackbacks/Pingbacks