What is Weathering Fastness Testing Machine?

Weathering Fastness Testing Machine – tunlight simulation test chamber
ltaperature Range: 25-200 °C
Humidity range: 50-98%
Irradiance Range=35-150 w/m2
Material: Stain less steel
Lamp: water cooled xenon arc lamp

You may read about Light Fastness Tester

WORKING INSTRUCTION

BUYER WEATHER PROOF. SLEEVE LONG 4⅜” + 1⅜”  WIDTH 1″ POINTED BOX, GAMBLE ¾ ”
ORDER NO PONO- S1625 # STYLE – F75013 SM.      LOWER 1² ROLLING.
STYLE MEN’S LONG SLEEVE B/D COLLAR SHIRT. HEM ¼ ” TAIL BOTTOM.
QANTITY  15030  PCS Plus/ minus Quantity= 5 %.  PACK HANGER PACK.
DELIVERY 30-07-07 NECK BOARD N/A.
FABRIC 100 % COTTON  CODUROY. COLLAR INSERT N/A.
INTER LINING 100%  COTTON  FUSED  EC  2325  M   COLLAR,  BAND  &  CUFF.  T/C  NON – FUSED  T 6112 M  F/PLKT. BUTTER FLY N/A.
MAIN LABEL   “WEATHER PROOF”  ATT.AT  ¾ ² BELOW FROM NECK SEAM 4 SIDE STITCH  PIN N/A.
SIZE LABEL WOVEN SIZE LBL ATT. UNDER THE MAIN LBL. POLY USE.
 CARE LABEL  IN SIDE SEAM AT WEARERS LEFT SIDE 4″ UP FM BTM BACK BOARD SIZE N/A.
BUTTON (HORN) 18/L NECK = 1 PCS, FRONT= 6 PCS, 2 PCS EACH  CUFF. 14/L EACH COLLAR  & SLV PLKT 1 PCE. FOLDING SIZE ½  FOLD
SPARE BTTN. ATT. AT LOWER INSIDE  14/L 1 PCE 2 ” & 18/L 1 PCE  3 ” FM BTM HEM. CLIP PLASTIC CLIP WITH ELASTIC 1 PAIR.
THREAD MATCING. TISSUE N/A.
COLLAR STAY N/A. CUFF PRESENTATION N/A.
COLLAR  B/D COLLAR (SINGLE LAYER). HANG TAG  “WETHERPROOF INTAGRATED” ATT. AT 3RD  BTN HOLE WITH  BLACK D/LOOP. * PRICE TICKET ATTACHED UNDER SLV SEAM THROUGH TOP OF WEARER’S LEFT CUFF SEAM COLOUR & SIZE WISE WITH WHITE TAG PIN 3″.
CUFF 2 ¼ ” ROUND CUFF , 1 HOLE 2 BTN, 2 PLT AT CUFF JOINT. PLKT EDGE TO 1ST PLT  1 ¾ “, PLT TO PLT GAP ½ ”
FRONT 1 ½ ² WIDTH  WELTED KANSAI (4 NIDDLE D/ST.).
BACK     1 ½ ” BOX AT BACK. * COLLAR POINT    –  3″ * COLLAR HEIGHT – 1⅞” * BAND HEIGHT      –  1⅛” * COLLAR SPREAD –  3″ * TIE GAP                   – ¼ ”
YOKE   DDOUBLE.
POCKET   1 CHEST ROUND PKT  WITH “V”  SHAPE.  HEM (1″ × 1 ¾ “),  CORNER BOX ST.  PKT 1L × W = (5 ¾ ” × 5 ½ “)

NOTE

COLLAR  BTN  DOWN  ½ ” SELF FAB. INSIDE GRMNT MUST BE FUSED INT.

  • FLAG LBL ATT. AT PKT SEAM. (DO NOT STITCH LBL DOWN) FOLLOW THE SAMPLE.

* ONE BODY ONE WAY CUT & MAKE.

INTER LINING

COLLAR, BAND & CUFF BIAS CUT,  ONLY F/ PLKT STRAIGHT CUT.

PKT POSITION: – F, EDGE / YOKE POINT A+B S – 8 ¼” ´ 3 ², M- 8 ½ ´ 3″, L- 8¾” ´ 3²,XL – 9″´ 3¼”,                XXL =9¼”´ 3¼ XXXL – 9 ½” ´ 3¼”          

SPECIAL INSTRUCTION

  • S.P.I – 9/10.                                                                                                              
  • 1/32 ”  TOP ST. AT COLLAR JOINT,  SLV PLKT & BAND  TOP ST
  • DOUBLE STITCH AT COLLAR , CUFF, F/PLKT,  PKT, BACK YOKE, F/SHOULDER & ARMHOLE. ST. TO ST. GAP ¼                                                                                  
  • ¼ ” FRENCE SEAM AT ARM HOLE DNST.            
  • SIDE SEAM FEED OF THE ARM BOTH SIDE AT FRONT (ST. TO ST. ) GAP ¼ ”           
  • CUFF  ROLLING  ⅜², * BAND ROLLING ¼ “.                                                                                         
  • HOLE MEAS- NECK SEAM  TO 1ST HOLE 2 ⅜² REST OF HOLE 4²                                    
  • BTN ATT.  CROSS & LOCK STITCH. * SUPPORT USE AT COLLAR B/D INSIDE.

ANY JOINT STITCH & PUCKRING NOT ACCEPTABLE.