Viscometer Technical Parameters:

  1. Viscometer Adjustable inclination: 0 ~ 60 °
  2. Table width: 120mm
  3. Test area width: 80mm
  4. Standard Ball: 1/32 inch to 1 inch
  5. Dimensions: 320 (L × 140 (B) × 180 (H)
  6. Weight: 6kg
  7. Digital Viscometer

Following factors should be considered before viscose dyeing

  • In poor-quality viscose, carbon disulphide (used to form cellulose xanthate) remain in the fibre and may create strong yellowing during pre-setting and unlevel-dyeing problems while reactive dyeing. So bleach the fabric with soda ash and hydrogen peroxide to eliminate carbon disulphide.
  • If possible use hot brand dyestuff. If hot brand dyestuff is not available, dose colour at 45 degree Celsius to reduce affinity of dyestuff.
  • Use migration method of dyeing.
  • Use a 1 degree cel per minute gradient for temp increment when temp rise 45 degree to 90 degree.
  • Use liquor ration 1:10
  • Use sclavos dyeing machine if possible.
  • Use less salt and soda for dyeing.

Other Machine

  • SINGLE NEEDLE L/S
  • BUTTON STITCH M/C
  • CLOTH DRILL M/C
  • BAND KNIFE M/C
  • END CUTTER M/C
  • DICE CUTTING M/C
  • COLLAR BOTTOM C/M
  • COLLAR TURNING M/C
  • AIR COMPRESSOR 70 LTR
  • AIR COMPRESSOR 40 LTR
  • AIR COMPRESSOR 300 LTR
  • NECK PRESS M/C
  • STEAM BOILER
  • GENERATOR 250 KV
  • FOLDING M/C
  • AUTO STRAPING
  • GRANDING M/C
  • DRILL M/C
  • LABEL CUTTER M/C
  • BOILER STEAM IRON
  • STEAM
  • ELECTORIC IRON
  • ELECTRIC STEAM IRON
  • VACUM TABLE
  • TABLE VICE
  • DIGITAL THERMO METER
  • THREAD RECONE
  • NEEDLE DETECTOR
  • MICROMETER
  • SNAP BTN M/C
  • STEAM IRON TANK
  • TOP CENTER M/C
  • FABRIC INSPECTION M/C
  • SATTLE STICTCH M/C
  • BARTCK M/C
  • NUMBER M/C
  • HAND GLOYSL
  • THREDE TRIMMER
  • ROBBON CUTTIN
  • ZIG-ZAG STITCHING M/C
  • SADDLE STITCH M/C
  • BLIND STITCH M/C
  • EYELET HOLE M/C
  • FRONT PLACKET FUSING M/C
  • SLEEVE PLACKET FORMING
  • METAL DETECTOR
  • CAD SYSTEM
  • FUSING M/C
  • BAR TACK M/C
  • PIN HOLE M/C
  • ZIG-ZAG STITCHING M/C
  • SADDLE STITCH M/C
  • BLIND STITCH M/C
  • COLLAR BOTTOM CUTTING M/C
  • COLLAR FORMING M/C
  • STRAIGHT KNIFE CUTTING M/C
  • BAND KNIFE CUTTING M/C
  • CLOTH DRILL M/C
  • DIE CUTTING M/C
  • FUSING M/C
  • SINGLE NEEDLE LOCK STITCH M/C
  • TWO NEEDLE LOCK STITCH M/C
  • OVER LOCK M/C
  • TWO NEEDLE CHAINSTITCH M/C
  • MULTINEEDLE CHAINSTITCH M/C
  • FEED OFF THE ARM
  • BUTTON HOLE M/C
  • SIDE SEAM FUSING M/C
  • FRONT PLACKET FUSING M/C
  • ARM HOLE FUSING M/C
  • SLEEVE PLACKET FORMING M/C
  • NECK PRESS M/C
  • FABRIC INSPECTION M/C
  • METAL DETECTOR M/C
  • HAND HELD NEEDLE DETECTOR
  • THREAD SUCKER M/C
  • GENERATOR
  • SNAP BUTTON M/C
  • ARM HOLE FUSING M/C
  • SIDE SEAM FUSING M/C