Shade Segregation Machine

After off-loading the fabrics, one swatch has to be cut from each roll, then mention the yardage and roll no on it. From all these swatches we form a blanket and if it is wash program then send for washing. Washing will be done as per approved standard for that Po # with respective color. This wash blanket will be approved by merchandising dep., technical manager and in case of any discrepancy then it will rewash. Approved blanket will cut into swatches and with the visual effect of each swatch, we assigned them one family. There can be different color family in one color. Color family is always finalized by merchandising manger and technical head. This approval recorded into one report which reveals full information about each color family like roll no. Yardage, no of color family etc… With this report, fabric store will issue the bulk fabric to cutting dep. Fabric store will not issue second color family even a single roll is pending from first one. So one time one color family only then next one. Check also Segregation Tester 

4 Point System Fabric Inspection Report

The supplier does 100 % fabric inspection. Factory is doing 10% inspection on received qty by American 4 point system.   The given points will be on following defects basis…

0-3 inch           (1point)

  • (2point)
  • (3point)

Above 9”         (4point)

After allocating the points on any roll / lot, with the help of following formula we find the POINTS PER 100 SQUARE YARDS

POINTS / 100 SQ.YD.           =          TOTAL POINTS X 3600

ACTUAL LENGTH X CUTABLE WIDTH

According to the American standards of evaluation, a lot is accepted if it has 40 or less than 40 points/100 Sq.yard. In Lenny, in order to have the best quality output, the points is reduced to 20.(i.e.) if a roll has more than 20 points/100Sq.yard, then that roll is termed as rejected and Technical manager or Merchandising manager will take final decision on that particular roll. The inspection format called RANDOM INSPECTION REPORT FOR FABRICS. This format reflects the full fabric defects; about widths (which play a vital role in cutting,) roll length, etc…

It’s duly signed by fabric inspector and submits the report to quality section. One copy also goes to technical manager

SHADE SEGREGATION

When fabric is received, 8 inches of head ends of each roll has to be cut, mention the yardage and roll no on it. From all these head ends, we form a blanket and if it wash program then send for washing. Washing will be done as per approved standard for that Po # with respective color. This wash blanket will be approved by merchandise dep., technical manager and in case of any discrepancy then it will rewash. Approved blanket will cut into swatches and with the visual effect of each swatch, we assigned them one family. There can be different color family in one color. Color family always finalize by merchandise manger and technical head. This approval recorded into one report which reveals full information about each color family like roll no. Yardage, no of color family etc… With this report, fabric store will issue the bulk fabric to cutting dep. Fabric store will not issue second color family even a single roll is pending from first one. So one time  one color family only then next one.