Press Knife

DDR 380 Technical Parameters and Basic Configuration of Press Knife
A. Supply Scope: Host machine, motor, joint, foundation bolt, protective hood

  • Main technical parameters:
  • Diameter of disc mill: 380mm
  • Consistency of refining: 2-4%
  • Stock inlet: 0.15-0.25Mpa
  • Capacity: 6-25TPD
  • Diameter of stock inlet: 65*2Mm
  • Diameter of stock outlet: 80Mm
  • Rotating speed of rotor: 980R/min
  • Motor power: 37 KW
  • Size: 2200mm×900mm×1000mm
  • Weight: gross 2200KGS; net 2000KGS
  • Characteristic description:
  • Manual press knife, auto pressure balance 2) Packing seal
  • Various gear grinding type
  • Material Description
  • Body material: Cast iron or cast steel 2) Material of disc mill: Low nickel alloy
  • Main shaft: 40Cr hardening and tempering 4) Bearing: ZWZ brand
  • Motor: KAIYUAN

Terms and Conditions:

Payment: Payment Term 100% Irrevocable L/C At Sight
H.S.CODE:  84345459.10.00

Delivery time: 45 workdays after receiving L/C original copy.

Port of loading: Any Seaport of China

Port of Discharge: Chittagong, Bangladesh

Shipping by: Standard seaworthy export package.

Shipping period: About 30 workdays.

Our bank datum is as follows:

BENEFICIARY NAME: JINAN EASTTAI IMP & EXP CO.,LTD
BENEFICIARY ACCOUNT NO.: 21174509124454966

BENEFICIARY BANK NAME: BANK OF CHINA

BENEFICIARY BANK ADDRESS: SHANDONG BRANCH ZHANGQIU SUB-BRANCH,NO.46, HUIQUAN ROAD, ZHANGQIU CITY, SHANDONG PROVINCE, CHINA Swift Code: BKCHCNBJ4545500