What is Kitchen Hood, Ducting abd Exhaust Fan

What is Kitchen Hood, Ducting abd Exhaust Fan

Sl. Description
01. Supply, fabrication and installation of SS Magnet (Made by India, Grade – 202) steel sheet kitchen hood, materials thickness 1mm Non-magnet base blome SS Sheet and oil chamber work complete with as per direction by Kitchen Shed. Size: H-36” x V-30”  
02. Supply materials return Exhaust Fan, 2800 Rpm, 2 Hp Chinese Motor, drum blower, Body making R.K. Engineering. 2 years grantee and 1 years free service
03. supply of Fresh air fan, 2800 Rpm, 2 Hp Chinese Motor, drum blower, Body making R.K. Engineering 2 years grantee and 1 years free service
04. Supply tandori chula, Magnet SS Box, SS Sheet, Size: (33” x 33” x 30”) with gas burner and replacement system all set as per as drawing
06. Supply, Fitting and Installation Four Burner Brick Slab Top Side and Drain Line All SS Raping as per as picture Note: Burner, Key, Warring pipe, Miter All Complete Fitting and installation
07. Supply, Fitting and Installation Brick Slab Working Table Top Side SS Sheet Raping as per as Decision
08. Supply, fabrication and installation of galvanized sheet steel duct work complete with bends. Tees, reducers, branch takeoffs, air chamber etc. as per direction and drawing. Hangers, brackets, stiffeners and isolator boxes shall be fabricated with M.S. angle/F.I. bar or rod as per drawing and direction and shall be galvanized. Duct shall be constructed with best-bloomed galvanized sheet steel. Before installation of duct, inside and outside shall be cleaned from any dust. Between flanges, for flanged end duct, approved type of gasket shall be used. Approved type of sealing compound shall be used to make the duct work leak-proof. Duct shall be hanged or supported at an interval of not more than 1.8 meter c/c. a) 24 SWG duct making & return and fresh air, b) Supply materials & installation Aluminum diffuser (6” x 36”), C) Supply materials & installation canvas connection
09. Supply Fitting and Installation Hot Plate and Bur B Q Lava Stone Type as per as picture (30inch X 36 inch,  4inch (+/-)

Terms & Condition:

  1. Payment: 70% advance confirms work order and 30% after completion of work within 10 days.
  2. Completion of Work: 10 days after delivery of materials.
  3. Extra materials will be supplied according to above unit rate.
  4. VAT & Tax not including in this offer.