Heavy Duty Elmendorf Tear Tester

Sl No. Elmendorf Tear Tester Description Qnty Remark
01 50% Calibration Weight for 6400gm  1pcs  
02 50% Calibration Weight for 12800gm 1pcs  

ELMENDORF TEAR TESTER (Light duty Normal)

Sl No. Elmendorf Tear Tester Description Qnty Remark
01 1600gm Weight  1pcs  
02 3200 gm Weight 1pcs  
03 6400 gm Weight 1pcs  
04 50% Calibration Weight for 1600gm 1pcs  
05 50% Calibration Weight for 3200gm 1pcs  
06 50% Calibration Weight for 6400gm 1pcs  
07 Calibration Support Key 1pcs  

ELMENDORF TEAR TESTER (Light duty Digital)

Sl No. Instrument Description Qnty Remark
01 1600gm Weight  1pcs  
02 3200 gm Weight 1pcs Melt Index Tester  
03 6400 gm Weight 1pcs  
04 50% Calibration Weight for 1600gm 1pcs  
05 50% Calibration Weight for 3200gm 1pcs  
06 50% Calibration Weight for 6400gm 1pcs  
07 Align Key 1pcs  
08 Calibration Support Key 1pcs  
Mandatory–Physical Tests      
EVALUATION MINIMUM REQUIREMENTS TEST
PROCEDURE 		Target TEST METHODS
 Dimensional Stability to Laundering All fabrics (Knits & woven) Length: ±3.0% Width:  ±3.0% AATCC TM 135 TP 35 or TP 36
 Spirality  Single Weft knits & French Terry (E.g. Acceptable for a 50 cm garment, if before wash=7, after wash=3, Total =10)                                                   51- 75cm garment length       Greater than 75cm garment length                                                                                         Total Spirality: 9º max Before Wash:  6º max After wash: 4º max   Total Spirality: 8º max Before wash: 5º max After wash: 3º max   ISO 16322-2 TP 30
 Fabric Weight (g /m²)   As Specified, Tolerance ±5% ISO 3801 TP 20
Knit Fabrics -Pilling All weft knits including Polar Fleecy But excluding 100% Cotton, Cotton/Elastane blends and all fabrics with a Brushed/Pile surface on garment face side     After washing: Rating: 3-4   ISO 12945-1 TP 60
Knit Fabrics -Stretch Properties – To be met for all fabric fibre compositions including elastane blends Knits         Fleecy (Brushed & Unbrushed) French Terry Ponte de Roma             Length Stretch: 20% min Residual Ext: 10% max Width Stretch: 60% min Residual Ext: 30% max   Length Stretch: 15% min Residual Ext: 10% max Width Stretch: 30% min Residual Ext: 10% max   Note: These requirements are guidelines only, the stretch properties obtained and approved during the sampling stage and fit approval shall be used as the reference standard.         BS EN 14704-1   (modified – single load cycle only, residual determined after 60s. 30N load required)       TP 50 /TP 51                    

Cont. Mandatory Physical Test Requirements

EVALUATION MINIMUM REQUIREMENTS TEST PROCEDURES TEST METHODS
Pilling – Woven Fabric (Martindale Test Method) Synthetic & Synthetic Blends only After Wash Rating: 3-4 ISO 12945-2 (modified- self fabric to self fabric) TP 61
Tear Strength – Woven Fabrics Warp & Weft 12N ISO 13937-1 TP 41
Tensile Strength – Woven Fabrics Warp & Weft 220N ISO 13934-1 TP 42
Seam Slippage – Woven Fabrics Warp & Weft 110N ISO 13936-2 (fixed 6mm seam opening) TP 40
Stretch Properties – Woven Fabrics Mechanical Stretch       Elastane Blends     In direction of stretch Stretch: 15% min Residual Ext: 5% max   In direction of stretch Stretch : 20% minimum Residual Ext: 5% max.     BS EN 14704-1 (modified: single load cycle only, residual determined after 60s)     TP 44/45
Zipper Fasteners (Refer Target TQM 43 manual for other requirements) Refer  Target Performance Code PZ1 BS3084 AS2332 N/A

Conclusion

End of Elmendorf Tear Tester article